Kingint release agent 2621W

Perma-Mold? 2621W is a concentrated aqueous semi-permanent release agent. Suitable for the production of silicone mold surface temperature is between 93 ℃ to 230 ℃ of. Perma-Mold? 2621W chemically bonded to the mold surface to form a thin uniform layer of inert film, resulting from the type of effect. Perma-Mold? 2621W fast deposition at 150 ℃ 5 minutes to cure. Scope of silicone rubber production. Advantages § Fast curing, easy to use § water-based products, does not burn § residue, no pollution § semi-permanent mold, a spray, multiple stripping § dilution, reduce costs § does not change the value of products, flexibility and resistance § free CFC, harmless § solve tearing, improve production efficiency § no transfer, does not affect the finished secondary processing (such as painting, printing, laminating, etc.) § Physical and chemical properties Appearance - clear to yellowish liquid §PH value - - 11 § Density - 1.08 kg / liter § shelf life - 12 months § sealed storage boiling point - no § Save - mold should be cleaned before 0- 49 ℃ how to use it, to avoid residual mold release agent or polymer char influence Perma-Mold? 2621W cured on the mold. Companies recommended Yankee mold cleaning agent mold cleaning KT-105 Super Cleaning mold. 1, in the first use of clean hot mold Perma-Mold? When 2621W, should be thin and evenly sprayed at least three times, at intervals of 30 seconds between each pass, 2, release agent can be dry. Then heated for 10 minutes after the start of production. 3, use spray equipment with compressed air gun 10-25 cm from the mold surface. 4, in order to achieve the best results, it should spray at a temperature above 100 ℃. 5, the production process, according to the need to fill the spray can continue production after heating for 30 seconds. 6, in order to avoid excessive accumulation in the mold release agent, do not spray too much. After emergency treatment with the cover tighten the vessel to prevent evaporation or contamination. The storage temperature is too low, the release agent before use preheated to room temperature and the proper use of the product will not cause harm to humans. Packaging Perma-Mold? 2621W Packaging 20 liters / barrel and 208 l / barrel two kinds 13380054015 Xiao Jianhua