Bucket elevator

Conveyor bucket elevator works are: material from the hopper to the following storage in to scoop up, along with the conveyor belt or chain promoted to the top, bypassing turned downward after the top round, bucket elevator the material is poured into a receiving vessel inside. Belt drive transmission belt bucket elevator commonly used rubber band attached to the lower or above the upper drive roller and bend pulley below. Chain and bucket elevators are generally equipped with two parallel transmission chain, on or beneath a pair of drive sprocket, under or on top of a pair of redirection sprocket. Bucket elevators are generally equipped with housing, in order to prevent the bucket elevator in the dust. Main features: 1. Drive power is small, the use into the feeder, induction discharge, large capacity hopper-intensive material disposed at the lifting almost no feed back and excavating, and therefore less reactive power. 2. To enhance a wide range of types of materials such hoist, the less performance requirements, not only to enhance the general powder, small granular materials, but also enhance greater abrasive materials. Sealing, less environmental pollution. 3. Run reliability, advanced design principles and processing methods to ensure the reliability of the machine running, trouble-free time more than 20,000 hours. Hoisting height. Smooth hoist operation, so you can achieve a higher lifting height. 4. Long service life, improve feeder to take inflow style, without using bucket digging materials, extrusion and collision between material rarely occurs. This machine is designed to ensure that the material spilled at little feeding, unloading, reducing mechanical wear.