Decorative tube polishing machinery and equipment - Standard 10 group

Standard 10 round steel polishing machine motor (grinding head) Power: 4KW Main motor power: 2.2KW Total power: 42.2KW Length: 6.8 m, width: 1.4 m grinding shaft diameter (mm): 36 Number of motors: 11 polished workpiece Dimensions (mm): 12.7 ~ 76.2 tube thickness (mm): 0.25-2.5 polishing rate (m / min): 3-24 Weight: 5 t Price: failures and solutions include: 1, can not turn back the host starts; When replacing the fuse 3, polishing; power on, press the reset switch thermal relay; replace the contactor:;: Measures power, according to plans access to 220V voltage, repair gear box, sent repair service center 2, the motor can not start the way grinding seat vibration; way: grinding or replace buff 4, polishing severely bent tube polishing;: re-adjust the center line, adjust the grinding wheel pressure of 5, polishing polished enough light pipe;: replace the buff, wax; adjust grinding wheel use items: 1, before the new machine boot, should be enough to see whether the voltage 380V, gear box, whether grinding seat has filled with oil, the first oil change period of 100 hours (about 15 days), After filling replaced once every 1000 hours; 2, polishing machine is very dirty after use, should be cleaned once in a day. Cleaning possible without water, compressed air can be blown clean in order to avoid electrical short circuit.