Supply ribbon embossing machines

1. embossing machine Duty Cycle stability of the machine adopts vacuum tube, the output power stability, the adoption of international industrial band Oscillation Frequency 27.12MHz, output cycle in line with international standards 2. embossing machine powerful nose, the pressure can easily adjust: The head design to promote the use of toggle lever principle, can make the pressure uniform, on and off smoothly, the severity of head pressure can be adjusted to suit the needs of different degree of welding depth, coupled with double springs, ride a special light and the pressure standard so that products can maintain good results, especially suitable for difficult alignment products. You may choose to pneumatic devices. 3. embossing machine to avoid radio interference devices: with high frequency stabilizer and high frequency shielding devices, the high-frequency interference to a minimum. 4. embossing machine output power: The machine uses low-loss coaxial resonator, so the output power, in the most rapid time to make welding products, and greatly increase production. 5. embossing machine safety devices: work when the current load exceeds the limit value, the overload current relay will automatically cut off the pressure, vibration protection and rectifier tube, the machine is equipped with high sensitivity spark suppressors, and will avoid improper operation caused by the frequency drift, so to minimize damage to electrodes and materials, while warning lights are illuminated warning. 6. embossing machine heating device: no grade heating thermostat device, according to different production needs, adjust the temperature, make work more efficient. 7. embossing machine automatic over-current protection system: automatic over-current protection system, increase the life of vacuum tubes to protect the mold