Reinforced concrete structure coating technology company to share

 Henan Sanhe structural reinforcement Engineering Limited is a company specializing in reinforced concrete reinforcement company drilling, static cutting reinforcement, anchorage reinforcement anchorage, bonded steel reinforcement, carbon fiber reinforced carbon fiber sheet reinforcement, slope reinforcement, high-pressure jet concrete reinforcement , steel, crack repair and strengthening, CGM grouting, bridge reinforcement, reinforcement company today Xiaobian share concrete structure coating technology: 1, concrete surface treatment to remove concrete substrate surface dust, laitance, oil and loose defect, large In addition to cutting after the defect must cement mortar or inorganic binder interface dubbed putty fill level, anti-carbonation coating before brushing the concrete surface of the substrate in advance sufficiently moist. 2, anti-carbonation by liquid primer material (A component): powder (B component) = 1: 1 ratio of good preparation underlying anti-carbonation coating, roll coating or brushing method of brushing the anti-carbonation coating together, After the coating surface and slightly dry (interval is dependent on the concrete surface and the climate is dry condition), then brushing the surface layer of anti-carbonation. 3, anti-carbonation by liquid topcoat material (A component): powder (B component) = 1: 2 ratio of the surface layer of anti-carbonation coating formulation, using roller or brush brushing method The anti-carbonation coating 2 ~ 3 (brushing every interval on a slightly dry surface after the coating thickness should be thin and uniform). 4, curing top coat fully dry and hard, first with atomized water conservation 4 ~ 5d (not direct sun water conservation), then natural drying curing 14d out of water before touching above. More on reinforcing aspects of issues related to strengthening the company, please visit the official website www.hnshjg.com.