Magnetic brakes / brake / clutch

Construction and principle magnetic clutch and brake by the drive unit (input shaft) and a driven unit (output shaft) and made whole. In the space of two units, filled with a particulate powder (volume of about 40 microns). When the magnetic coil is not conductive, the torque from the drive shaft is not conductive to the driven shaft. However, if the coil flux on the surface due to the magnetic force generated attracts magnetic hardening. Continuous torque between the slide will convey. Internal structure and working principle of magnetic brakes, magnetic clutch broadly in line with similar, also have the same characteristics. Note, however, that that is the basic usage, the two are certain respectively. As for the users to choose the kind of products, we will have different needs depending on their production lines. Note the use of magnetic brakes 1. Please note moisture. Magnetic damp, then performance will become unstable, so be careful not to let the oil or water intrusion inside. Especially attached to the gearbox, the oil branch invade internal transmission shaft, so use the film completely sealed. 2. Please note that the surface temperature. The maximum surface temperature caused by continuous operation when running more than 90 degrees, beyond this value, durability is greatly reduced. Be sure to limit the temperature of the above criteria, be sure to keep within the allowable work rate of the slide when in use. The Company's solemn-Connaught: Where to buy the company's products (from date of purchase) Full year free warranty. These products are the property of homegrown. Contact: Contact: Luo Yang (Mr.) Tel: 86 0769-85981488 Mobile: 13827210523 Fax: 0769-85753489 Address: Baihao Industrial Zone, Houjie Town, Dongguan City, Zip Code: 523000 Homepage: http: //www.dgenyang .com /