Yun Feng Plastic certified, Tianxin produce plastic pallets, plastic pallet manufacturers

Development work situation ⑷ tray tray can be said synchronized with forklift. Forklift and pallet together to form an effective handling system that allows loading and unloading efficiency is greatly improved. From a statistical perspective, the tray is basically to use with forklifts. Each truck is equipped with an average of 800 to 1000 trays. Correct use of plastic trays should be done with the appropriate code on the packaging mix tying a plastic tray and wrap, easy to use mechanical handling and transportation, to meet the handling, transportation and storage requirements. In order to make plastic pallets can be safely used for a long time, we hope the following requirements according to the proper use of plastic pallets: 1 plastic tray to avoid suffering from sun exposure, in order to avoid aging and shorten life. 2. prohibited goods thrown from a high place in the plastic tray. Reasonably determine the manner of goods stacked in the tray. Goods placed evenly, do not focus stacking, offset stacking. Carrying heavy trays should be placed on a flat surface or a surface. 3. prohibited the plastic tray from a height into the falling, avoid violent impact caused the tray broken, crack. 4. When a forklift or manual hydraulic car operations, fork pallet fork prick holes to the outside as much as possible by foot, fork prick should be fully inserted into the inner tray, after a smooth lift the tray before conversion angle. Pallet fork prick can not hit the side of the tray to avoid crushing, crack. 5. tray on the shelf, shelf-type trays must be used, according to the carrying capacity of the shelf structure, depending on the use of non-overloading. Fourth: Fourth, the Act extrusion production of plastic pallets are assembled. That is, using an extruder, head and other equipment were out as the upper and lower panels of slats and a connecting plate-shaped support with a biplane connection with, and then assembled. WPC appear to promote the extrusion molding plastic tray development. It is based on natural vegetable fibers (including wood flour husk, straw powder, rice bran, etc.) and waste plastic as the main raw material, the plastic tray with both wood texture, but also has a waterproof, anti-pest advantages, and may planing, sawing, nailing . In the four kinds of molding method, the method of production equipment, mold into a minimum, the lowest cost, best price-performance, Beijing, Guangdong and other places have this product.