Paint Factory touch-type static eliminator column proof body static eliminator bars release the ball electrostatic column

Touch-type static eliminator column / body static elimination bar / explosion release the ball / static column touch-type static eliminator that is the human body static eliminator. With the rapid development of the industrial economy, more and more it is important to eliminate static electricity, also we can not ignore the important part. Body static eliminator it is to adopt a passive circuit, static electricity on the human body to make use of the circuit, and finally to eliminate the electrostatic effect. Its features are: small size, light weight. No power. Easy to install. No sense to eliminate static electricity when other characteristics. Medical studies have proven: the accumulation of electrostatic hazards human health: some people allergic reactions, heart rhythm disorders, headache, insomnia, irritability and other symptoms, and some people bristle, nervousness, fear of contact with metal objects. In addition, when the body accumulate electrostatic touch computer cause the computer to crash, electronics components breakdown, ignition and explosion of flammable gases and other major hazards. Touch-type static eliminator, its appearance is made of stainless steel tubes and stainless steel ball, it is used in chemical, metallurgical, military, oil, computer room, luxury hotels, high-level office and other flammable places. Circuit is basically the same principle and the other, its greatest feature is able to work in -50 ~ 100 ℃. Specifications 1). Body static voltage: v≤20kv 2). Electrostatic discharge time: t≤100ms 3). The maximum release current: i≤0.1ma 4). Ambient temperature: 20 ℃ 5). Humidity: ≤80% (40 ℃) test conditions and results of the human body static voltage: 18kv ambient temperature: 20 ℃ fingers release time + 0.091s residual voltage -10v fingers release time - 0.090s residual voltage -10v palm release time + 0.084s residual voltage -9v palm release time - 0.082s residual voltage -9v time in line with esd standard static elimination use and installation methods: base type static elimination ball, the ball seat has a hole, the hole has a static indicator, If the body has static, just use your fingers touch the metal balls above 0.1s to eliminate the human body static electricity. (Indicator light goes out about, obviously at night, during the day is not obvious.) If the body is less than 100v or no static static, static lights are not bright. Ground preferably not less than 0.3 square multi-strand wires to the ground lead. Maintenance: do not enter the inner steel debris, especially metal, because there are circuit originals, if a metal object into the circuit does not work properly. Because the ball and steel insulated from each other and therefore can not have other metal near the ball. Tel: 021-22818849 Mobile: 189-3042-7812