Sale of second-hand imported six-axis four shaver woodworking machinery

Moulders How to Maintain: moulders routine maintenance: ① new machine transmission gear oil should be within one month after the regular replacement of oil can be added to the oil mirror nearby. After an oil change every 2,000 hours of work in the machine around. The change of oil 90 or other conventional gear oils. ② feed gimbal every month to play a grease lubrication. Carriage, tool axis slider beam down and other moving parts once per week plus oil to lubricate and rust. ③ every day before work should clean up sawdust under the bed and bed, flat belts, CVT belts and more to clean up, anti-skid burned. Some wide, variant material to deal with it and then enter moulders processing. ④ conditional manufacturers can produce four light board and the finished board is divided into two machines do, so as not to affect accuracy. In addition, the production of four light board, trimming knife best little higher than the back gate by 0.1 mm, thus reducing wear small rely on gate. ⑤ new machine debugging or displacement adjustments to the machine should be level. ⑥ moulders pressure around 0.3 to 0.4Mpa, should not be too big or too small, the cylinder should be lowered in order to increase the scope of activities,