Automatic winding machine

I. Introduction and characteristics suitable for medium-sized electrical flat wire flat wound ,, standing around. Built-in frequency control system, Winder pull weight> 400kg, stepless adjustable speed 0-50 r / min, the shuttle pulled coil perimeter around 2-3m, motor power 2.2KW ,, single row of chain drive, and the other with simple line planes and brakes up tight. Features: Henan Mechanical and Electrical Equipment Co., Ltd. The new winding machine has the following characteristics: 1, simple structure, easy to operate, foot switch control, desktop operation. 2, in the design, the winding angle of the disk drive speed through the rigorous calculation ensures flat copper wire was used without further adjustment, as long as the flat copper wire coil fixed to a specified location, the start switch to automatic winding . Second, the scope and technical parameters applicable scope: suitable for medium-sized flat-ray machine around, stand around. Built-in automation control system, Winder pull weight> 400kg, stepless adjustable speed 0-50 r / min, the shuttle pulled coil perimeter around 2-3m, technical parameters: Model: QXRXJ Dimensions: 1550x650x850 MM Equipped with power: 2.2KW -6 speed motor winding disc diameter: Φ 500MM Spindle Winding back: 1300MM Motor speed: 940 r / min winding speed: 0-50 transfer weight: 150KG control mode: The drive brake Type: electromagnetic brake three mechanical equipment maintenance overhaul Description 1. In the course of this product should be kept clean, clean, prevent dust pollution; 2. This product moving parts, gear, etc. should be regularly refuel, in order to avoid being worn. Fourth, the safety instructions 1. The product is AC 380V, frequency: 50HZ; 2. avoid rain, away from flammable, explosive and corrosive chemicals; 3. This product is a frequent opening and closing of product, it should pay attention to their moving parts, to avoid being pinched or bruised; 4. long-term use, should be cut off the machine power.