Su Cheng dry, high yield Certified _ _ Spray Dryer spray dryer manufacturer

Pressure spray drying equipment using a pressure atomizer is the raw material liquid dispersed into small droplets, and the heat medium in the drying tower sufficiently heat and mass transfer, and ultimately achieve the purpose of the dried product. Dried product according to the needs of production into a fine powder, granular, hollow spheres or agglomerated. Structure applies pressure spray drying apparatus which atomizer easy to tune, can give the desired spray volume and droplet size by changing the internal structure of the nozzle, now the type of dryer has been extended to the food, chemical, pharmaceutical, building materials, environmental protection and other industries. As a large energy consumption of spray drying, how to keep them dry in the quality of products and further improve energy efficiency, increase the volume of evaporation intensity drying tower; reduce environmental pollution, reduce operating costs; enhancing the degree of automation to improve labor productivity; improve product quality while reducing the size of the equipment, reduce fixed investment and so has important research and application. Is the use of centrifugal spray atomization allows material dispersed into a mist, and full access to instantaneous hot air dried to form a powder drying means finished. Air to go through the early effect, in effect filters, heated by the rear heater drier air into the top of the dispenser, the hot air spiral evenly into the drying chamber and flows in contact with the material in a very short period of time, the liquid material dried into a finished product. In recent years, the rapid development of drying equipment industry, but our current drying technology, the overall technical level is still lagging behind, it is difficult to meet because of the economic development of related industries and product structure optimization and new product development requirements. Therefore, the required amount of new drying technology is increasingly incremented. Over the years, the domestic drying machine processing methods and processing equipment has also taken a more traditional hand-made, whether the use of function, and are subject to certain influence on the appearance. Moreover, one-piece hand-manufactured components that the size does not guarantee a good interchangeability, to swap drying machine maintenance, wearing parts inconvenience. It is understood that most of China's pharmaceutical, biochemical, chemical and other industries to easily oxide material and containing a liquid organic solvent drying material production, the gap is still using the operating mode heating vacuum entrained production.