Disc drying equipment, drying quality and excellence Yang Xu, disc dryer supplier

PLG series disc continuous dryer (dryer) works continuously added to the wet material from the feeder layer was dried on the dryer upper first disc, harrow arm with a rake leaf rake arm for rotary motion makes rotary movement to make rake leaves turn continuously copied material. Index material along the spiral flow through the drying disc surface, the material in the small drying plate is transferred to the outer edge, and falls below the outer edge of the large drying plate at the outer edge, on a big plate material moved inward and drop from the middle spout off as one small drying pan. The size of the drying plates are arranged alternately, the material can be continuous through the whole dryer. Drying heat-sensitive materials flow vacuum tray dryer is suitable for drying requires very low temperatures, such as medicines, vitamins, biological products, enzymes, solvent containing materials. After the wet material added in portions to withstand negative pressure doser, open the vacuum pump, so that negative pressure plate dryer status through continuous stopper material evenly join the dryer for drying operation, the dried material from the dryer the bottom of the discharge port. Escaping from the wet parts of the material receiving tank through the condenser and the solvent is recovered, the whole operation under negative pressure. PLG series disc continuous dryer (dryer) Technical characteristics: material transport system ◎ spindle speed: 1 to 10 rpm, electromagnetic or frequency stepless speed. ◎ rake arm: 2 to 8 is fixed on the spindle rake arm on each drying trays. ◎ rake leaves: splice rake arm can float to maintain contact with the surface of the plate, there are a variety of forms. ◎ Roller: Easy caking and needs pulverized material, in place by placing roller can be enhanced heat transfer and drying process.