Double cone rotary vacuum dryer vacuum dryer RONGFA dried Certified

Features ◎ material solution under vacuum to reduce the boiling point. The evaporator heat transfer driving force increases. Therefore, it can save a certain amount of heat transfer evaporator heat transfer area. ◎ source for operation of evaporation may be low pressure steam or waste heat steam. ◎ evaporator heat loss. ◎ can be disinfected before drying process, drying process without any impurities into the dirt, in line with GMP requirements. ◎ belongs to static vacuum dryer. It will not damage the body dry material. Adapt materials suitable for high temperature decomposition, polymerization and low temperature drying of heat-sensitive material deterioration; has been widely used in pharmaceutical, chemical, food, electronics and other industries. The drying effect of the product produced is an important driving force for change is contained in the liquid evaporation temperature, this temperature depending on process pressure vacuum dryer. Reduce process pressure evaporation temperature drop, it can bring many benefits, especially for contact drying. There is no need to design an ideal drying system only at the lowest pressure and maximum permissible temperature operation, because it would require large and expensive peripherals. Systems are typically designed to self-regulating pressure vessel. In other words, a condenser and a vacuum device is adapted to handle high steam flow at higher pressure, after drying also reduces the amount of downward pressure.