Governor of the urban network with Yueda food chain network length urban network with

The quality of life directly affects the joints and transmission line length urban network with the ability to smooth running smoothly. Several methods described below the belt fitting: 1. A method of fitting: Method conveyor belt joint are: a few common methods of mechanical joints, cold adhesive head, hot vulcanized joints. Generally refers to the use of mechanical splice connectors belt buckle, easy and convenient method of this joint, but also more economical, but inefficient joints, easily damaged, have an impact on the life of the conveyor belt products. PVC and PVG whole flame retardant anti-static conveyor belt joint, generally 8 with the following products are using this fitting method. Cold bonding head, which uses cold bonding adhesive for joints. This joint approach than the high efficiency of mechanical joints, but also more economical, should be able to have better fitting effect, but from a practical point of view, because the process conditions more difficult to master, in addition to affecting the quality of the adhesive joint is very large, so it is not very stable. Hot vulcanized joints, proved to be the best kind of joint approach can ensure a high joint efficiency, but also very stable, joint life expectancy is long, easy to grasp. But there are processes cumbersome, costly, long joint time and other shortcomings. Over the years, our company has been committed to the production and research in the long urban network with in daily life, our products have been widely used. Expert analysis box stuffing body insulation plate, including boxes isomers insulation materials, the filler insulation materials, no cold bridge connections, Edge insulation materials. The filler insulation material embedded in a cavity box isomers insulation materials, and the cavity is separated into enclosed air space and open air space, open vent hole in an open air space, the frame structure body heat the material side walls, no cold bridges connecting member is formed with a lock and a long urban network, no cold bridges connecting member extruded frame isomer insulation material, or through the insulation material from the edge, the outer surface of the cross groove is provided In the frame structure heat insulation material on the outer surface, a cross shape. This type of long-urban network with not only be used in wall insulation, slope roofing insulation, geothermal heating insulation, etc., but also has a light body, crack, noise, insulation, insulation, waterproofing, ventilation, anti-knot Lu, ranked tide, impact resistance, low cost, and convenience and landscaping construction and other characteristics, can meet the national building energy efficiency standards.