Gleason 606.607 arc tooth broaching machine

Product parameters --------------------------------------------- Model: NO .606 maximum pitch diameter (ratio 10: 1): 266mm maximum pitch diameter (ratio 2.5: 1): 238mm diameter section (thickest): 10mod limit ratio (minimum): 2.5: 1 tooth width (maximum): 41mm full tooth height: 19mm Teeth: 20 to 150 big end tapered bore diameter: 3-27 / 64 "per foot taper: 1/2" tapered bore depth: 5/8 "cutter diameter: 5", 6 ", 7 -1/2 "9" cutter speed (feet per minute): 25 ~ 65m feed (per tooth seconds): 2-10 Main motor: 7.5HP hydraulic motor: 3HP cooling motor: 1.5HP magnetic separator chip: 1 / 8HP (Note: 60Hz ~ 1800rpm, 50Hz ~ 1500rpm) area (length x width x height): 2.33x1.90x2.03m equipment GW: 6.1t American GLEASON American Gleason Model: No.607 maximum pitch diameter (ratio 10: 1): 266mm maximum pitch diameter (ratio 2.5: 1): 238mm diameter section (thickest): 10mo limit ratio (minimum): 2.5: 1 tooth width (maximum): 41mm Tooth Height: 19mm Teeth: 20 to 150 big end tapered bore diameter: 3-27 / 64 "per foot taper: 1/2" tapered bore depth: 5/8 "cutter diameter: 5", 6 ", 7-1 / 2" 9 "cutter speed (feet per minute): 25 ~ 65m feed per tooth seconds. Weight: 6.5 tons, the United States GLEASON ------------------------------------------- - Device Usage: 1. This machine is mainly used for rail grinding machine (flat rail, V-rail, side rails, a bottom rail, curves, big flat and beveled rails, etc.) 2. Although it is second-hand machine tools, but it's advantages, high accuracy, good stability, long life, eating large knife, wheel width, steel is good, hydraulically swing angle Dresser, grinding and other high potency. 3. This machine has sufficient rigidity and wear resistance: the table feed using cross-flow hydrostatic guideway, grinding horizontal feed use of international brands INA Germany's new rail slider and the machine never wear original parquet steel rails, fully enclosed protective cover. 4. The transformation of the main components when the machine is used: the new rail slider German company INA, new electrical cabinets, hanging and Fagg 8055 systems. 5. This machine has a complete hydraulic system, lubrication and filtration equipment, in addition to chip cooling device, electrical and electronic equipment. This device in Wenzhou, less equipment, 8 into a new, providing precision debugging, quality assurance, post-maintenance.