Pharmaceutical production water purification equipment

Pharmaceutical industry pure water equipment, medical industry pure water equipment Description: Purified water (Purified Water): Currently using reverse osmosis or other suitable method to prepare the pharmaceutical use of water, without any additives. Purified water can be formulated as an ordinary pharmaceutical preparation of solvent or test water can not be used in the preparation of injectables. Medical Purified water main purposes: Medical cleansing products, cleansing hand, medical and pharmaceutical treatment with pure water, purified water for injection. The most commonly used medical company when cleansing products and cleansing hand by the process: raw water - raw water pressure pump - multi-media filter - activated carbon filter - water softener - Ultrafilter - a reverse osmosis -PH adjustment - the middle of the water tank - the second stage reverse osmosis - Purification water (ozone preservation) - pure water pump - UV disinfection - microporous filter - water point (water quality conductivity 5US / CM or less). As a manufacturer of the above process only with purified water for cleansing products and Xian hand use. Medical water purification equipment design specifications: 1, the structural design should be simple, reliable, easy disassembly. 2, for ease of disassembly, replacement, cleaning parts, standardized design implementing agencies to maximize the use of common and systematic components. 3, the inner and outer wall surface of the device, requiring smooth, no dead ends, easy to clean, sterilized. Parts of the surface should be done chrome surface treatment to corrosion, prevent rust. Outside of the apparatus to avoid the use of paint to prevent peeling. 4. Preparation of water purification equipment should be proven low-carbon stainless steel or other materials do not pollute the water. Apparatus for producing purified water should be cleaned regularly, and verify the cleaning effect. 5, the material in contact with water for injection must be of high quality low-carbon steel (such as 316L stainless steel) contaminated material or other proven right quality produce. Preparation of water for injection equipment should be cleaned regularly, and verify the cleaning effect. 6, purified water storage period of not more than 24 hours, the tanks should be made of stainless steel or proven non-toxic, corrosion-resistant, non-bleeding ion contamination other materials. Vent should be installed to protect its non-shedding fibers hydrophobic filter sterilization. Tank walls should be smooth, not over and welds are dead and trachoma. Sensor does not show the formation of stagnant water pollution level, temperature, pressure and other parameters should be used. The tank should be cleaned regularly, disinfection and sterilization, and cleaning, sterilization effect is verified. 7, pressure vessel design, the unit shall be licensed and qualified personnel commitment, subject to national standards People's Republic of China