PE pipe manufacturers in Jiangsu Province, polyethylene pipe, PE water supply

PE pipe manufacturers in Jiangsu Province, polyethylene pipe, PE water pipe My company specializes in the supply of Jiangsu Province: Nanjing, Wuxi, Xuzhou, Changzhou, Suzhou, Nantong, Lianyungang, Huai'an, Yancheng, Yangzhou, Zhenjiang, Taizhou and Suqian PE pipe, PE water supply. PE pipe common specifications Φ75, Φ90, Φ110, Φ160, Φ200, Φ225, Φ250, Φ315, Φ400, Φ450, Φ630, factory outlets, welcome Jiangsu Province and other parts of the customers to consult. Xue Jingli 15517928512 PE pipe introduction: PE namely polyethylene plastic, is the most basic kind of plastic, produced by PE material made of PE pipe, a wear-resistant, anti-acid corrosion, high temperature, high pressure and so, gradually, replace the pipe, cement pipe and other traditional pipe, especially since this pipe, light weight for easy installation and moving, is the new drainage pipe of choice. According to PE pipes from the pressure rating to sub-divided into 0.6Mpa, 0.8Mpa, 1.0Mpa, 1.25Mpa, 1.6Mpa, Mpa pressure units, such 0.6Mpa pressure of 6 kg is the meaning. According to sub-diameter PE pipe can be divided into: 20,25,32,40,50,63,75,90,110,125,160,180,200,225,250,280,315,355,400, 450,500,560,630,710,800,900,1000,1200 units are mm is millimeters, PE pipe diameter are by diameter, corresponding to different levels of pressure, pipe wall thickness will vary . PE pipe connections: 1. Electric welding: the use of special electric hot-melt welder will be straight with straight, straight pipe and pipe fittings connected. Generally used for the following pipe 160mm. 2. Butt connection: Special butt welding pipe connected, generally used for more than 160mm pipe. 3. Plastic connection: to use flange, threaded threaded connections and other methods. PE pipe Installation instructions: 1. Before piping, tubing and fittings response and ancillary equipment be checked according to design requirements, and should be visually inspected at the construction site, to meet the requirements before use. The main test items include pressure levels, the outer surface quality, with the quality, consistency and other materials. 2, should use the appropriate special heating tool depending on the form of the interface can not use open flame heating pipes and fittings. 3, pipe welding mode connected, should use the same grade of material for pipes and fittings, for similar performance must be tested before they were qualified. 4, pipe and fittings should be placed at the construction site some time before connecting to allow consistent temperature pipes and fittings 5, in cold weather (--5 degrees) and windy environmental conditions to connect, should take protective measures or adjust the connection process. 6, when the pipe connection pipe end should be clean, when temporary closure should call it a day each nozzle to prevent debris into the tube. 7, should be visually inspected after pipe connections, who failed immediately rework. Polyethylene pipe, PE pipe applications: 1. City water pipe network system. 2. urban and rural drinking water pipes. 3. The feed liquid pipeline industry, chemical fiber, food, forestry, printing and dyeing, pharmaceuticals, light industry, papermaking, metallurgy and other industries. 4. Agricultural irrigation pipes. 5. postal and telecommunications lines, power cable protection sleeve. 6. Mine mortar pipes. 7. postal and telecommunications lines, power wire protective sleeve. Luoyang, China New Material Technology Co., Ltd. Address: Luoyang City of Zhejiang Industrial Park Tel: 0379-65260958 Fax: 0379-65260950 Hotline: 15896683211 15517928512 Xue Jingli QQ: 594185818 Website: www.lygrgyy.cn www.lygrjt.com