RT52-180L-8 / 2C3 start adjusting the resistance

Texas Geelong Electric Automation Co., the original (Qingyun Lean Resistor Manufacturing Co.) specializes in producing resistors, braking resistor frequency sensitive rheostat, reactors, linkage units, cam controller, overload limiter, stainless steel resistors, neutral grounding resistor, twenty years old factory, the old brand, resistor comprises RT, RY, RQ, RZ, RS, RP, ZX1, ZX2, ZX9, ZX12, ZX15 series and QZX1 electric vehicles, marine series totaling 280 Variety, BP1-BP8 series of frequency sensitive rheostat, resistors full range of stainless steel. Corrugated resistors, aluminum resistance. Gourd (journey) overload limiter. ZX1 type resistor is suitable for circuit AC 50HZ voltage to 660V and 440V DC voltage to the. Mainly for motor starting, braking and speed of use, and its capacity is about 4.6KW. ZX2 series plate resistors for AC 50HZ voltage to the circuit 660V or 440V DC voltage to the, mainly for motor starting, braking and speed of use. Resistor for the open type. ZX15 series resistor is open type, suitable for AC 50HZ, voltage up to 660V or less and the circuit DC voltage to 440V or less, the supply for starting, speed, braking, discharge and other purposes. Its capacity is 4.6KW, is made by the Fe-Cr alloy with a spiral wound around a tubular resistive element. ZX1 series resistors can replace application. Shockproof, easy to break and so on. With the cam control KT12 series, KT10 series, KT14 series, KT16 series, KTJ15 series supporting the use. The resistor is mainly RT series resistor is mainly used for cranes equipped with JZR2 series motor for adjusting the resistance of starting use. RT series resistors for cranes and lifting equipment like matches YZR series motors S3, S4 and S5 work Universal resistors made, it applies to AC 50HZ, voltage up to 660V circuit and the controller (screen) with, to control the motor starting, speed control and braking o no more than 2500 meters above sea level; o ambient temperature is not exceeded + 40 ℃ and no less than -30 ℃; o when + 20 ℃ to -5 ℃ when the air relative humidity less than 85%; o the surrounding medium does not enough to corrode metal and damage the insulation and potentially explosive gas and conductive dust; o must have anti-snow equipment and area is not filled with water vapor