CPC thyristor power regulator

CPC power controller Features 1, advanced micro-processing technology uses a high-performance ARM-r CORTEX-TM-M3 32-bit core, clocked at 72MHZ, speed, low power consumption, anti-interference ability. 2. friendly interface CPC Series SCR power controller using OLED LCD display. Graphical display mode, so that parameter setting, adjustment easier, more intuitive failure and real-time monitoring. 3, a powerful anti-jamming capability all external control signal, voltage and current, communications, output circuit using isolation technology, are used in special industrial environments. 4, a variety of control set open-loop control, constant pressure mode (U feedback, U2 feedback), constant current mode (I feedback, I2 feedback), constant power mode (p feedback), fixed periodic cycle mode, variable cycle cycle mode and phased + cycle control mode in one. 5, a variety of load wiring load can be connected to the midpoint of the star then zero, then zero is not the midpoint of the star, triangular connection, can be easily set by parameters. 6, Perfect protection throughout the detected current and load parameters, with a power voltage, power overvoltage protection, overcurrent protection, thermal protection thyristor load disconnection protection, frequency protection, phase protection. 7, the power supply frequency 42-68Hz frequency adaptive adaptive function, and real-time frequency display, user-friendly. 8, heat sink temperature real-time monitoring, fan-controlled high-precision digital temperature sensor, the detection accuracy of 0 0625 ℃, real-time monitoring of the radiator status. Cooling fan can be one thousand or automatic control, greatly extend its life and reduce noise pollution. 9, rich analog signal output and digital signal output interface; two relay outputs. Two signals can be directly arithmetic operations, very easy to achieve special control, analog input can be set to negative logic. 10, advanced communication features with RS485 communication interface, user-network connection control, increased automation and reliability of the system. Embedded Modbus standard protocol for easy configuration connection. 11, input and output voltage, current high-precision detection using 24 dedicated ADC, and the output is true RMS (TRMS), ensures accurate detection of non-sinusoidal signals. 12, the cumulative power display can run the power to the cumulative unit KWH.