Mitutoyo Micrometer thread

Thread micrometer 326, 126 series - replaceable anvil and the spindle probe type Features: up to IP65 dust / water protection standards (326 series). V-type anvil and the spindle probe 60 ° or 55 ° of (replaceable) option, by the senior special steel, with high hardness and high precision characteristics. Ratchet locking device to maintain a constant force. With SPC data output (326 series). Technical Data Accuracy: Refer to performance parameters (digital display type does not include the quantization error) Resolution *: 0.001mm or .00005 "; / 0.001mm division value * *: 0.01mm or .001"; spindle feed error: 3μm Display *: LCD Battery *: SR44 (1 个), 938 882 * Battery life: normal use is about 8 months Dust / Water protection level under: up to IP65 protection standards * Digital type ** ordinary digital type function Zero, data hold, auto power on / off, data output, preset, inch / mm conversion (inch / mm models) Alarm: Low voltage, Counting error Options 05CZA662: SPC cable with data switch (1m) * 05CZA663: SPC cable with data switch (2m) * * Only digital type (see page 69): Screw micrometer baseline rod. Anvil / spindle Set: Metric / unified thread (60o thread angle section) Item anvils - mandrel Probe Type 126-800 0.4 - 0.5mm / 64 - 48TPI (126-801) 0.6 - 0.9mm / 44 - 28TPI (126-802) 1 - 1.75mm / 24 - 14TPI (126-803) 2 - 3mm / 13 - 9TPI (126-804) 3.5 - 5mm / 8 - 5TPI (126-805) 5.5 - 7mm / 4.5 - 3.5TPI (126-806) for Whitworth thread (55o thread angle section) Item anvils - spindle probe types 126-810 60 - 48TPI (126-811) 48 - 40TPI (126-812) 40 - 32TPI (126-813) 32 - 24TPI (126-814) 24 - 18TPI (126-815) 18 - 14TPI (126-816) 14 - 10TPI (126-817) 10 - 7TPI (126-818) 7- 4.5TPI ( 126-819) 4.5 - 3.5TPI (126-820)