Jingheng advantage of wholesale Guanglu Dial Calipers 0-150mm Guanglu Caliper pointer

Custom processing: No Brand: GuangLu / Guanglu Model: dial calipers measuring range: 150 (mm) Resolution: 0.02 reading value: 0.02 (mm) Specifications: 0-150 Model: 0-150 Type: with Table vernier caliper measurement range : 0-150 (mm) readings: 0.02 (mm) Display: dial calipers made of high quality material made of hardened stainless hardened, hardness of HRC 54, wear resistance and long service life scale value 0.02mm scale line face extinction and chrome handle with locking device attached to the factory report and use Details: Dial Calipers have open open open and closed type of table thickness of ordinary table with roller closed relatively thick without Rollers Table caliper accuracy of 0.02MM closed dial calipers precision attention to the selection dial pointer 0.01MM 0.02MM purchases and some will be more left-right are normal or if the customer needs a hundred percent positive to 12 o'clock position to zero The words may not do so with these requirements, please explain in advance! Specifications are: 0-150MM 0-200MM 0-300MM manufacturing materials:? High quality stainless steel. ? Hardness treatment: whole scale heat treatment, measuring faces hardened grinding process, coating with good abrasion resistance:? Reticle surface chrome, has good corrosion resistance 鉵. ? Scale Indication: precision laser engraved lines, clear lines Scale accurate measurements:? Four functions, diameter, diameter, depth and step measuring Note: 1. Vernier caliper measurement tools are more sophisticated, to gently, may not knock or drop the ground. Should not be used when using measuring rough objects to avoid damaging the jaws, do not be in a dry place to prevent corrosion. 2. When measuring, you should loosen the fastening screws, not too much force to move the cursor. Contact between the jaws and the analyte should not be too tight. You can not move an object clamped in the jaws. 3. When reading, sight should be perpendicular to the surface and feet. For fixed readings, available fastening screws fixed cursor foot body to prevent sliding. 4. Actual measurements of the same length should be more measured several times, the average value to eliminate accidental errors