Shenzhen two tons movable forklift truck scale electronic scales 3 tons price

Weighing Equipment Co., Ltd., Dongguan Nan Shenzhen truck scales referred to as: hydraulic forklift scale, handling scales, trailer scales, electronic truck pounds. Forklift Scales light weight, easy to operate, mechatronics hydraulic station, high-strength steel fork structure, safe, reliable, durable, low price, economical and practical. Operating environment 1. Forklift electronic scale in the use of warm, to enhance the boom 5-10 times, oil pressure sensor is warm to normal operating temperature 2 operation, when the dump is raised, first of all should be controlled to manipulate the boom lever in pole position after that dump in the final end 3. The boom system should be strictly lubrication, reducing friction coefficient boom 4. Select weighing on relatively flat ground 5. The process should enhance the boom speed control 6. Set the case even better vehicle stop driving Zero 7. The weighing process to avoid car travel, for travel, should control the speed at 10KM / h or so 8 as with multiple dump must be corrected by the use Weighing dump 9 electronic scales before the first start the car boot, electronic scales close to avoid the water and then turn off the vehicle power supply 10. The cleaning such as meters, to avoid damage to Shenzhen forklift scale specifications are two, namely wide and narrow fork fork. Weighing range from 500kg to 3000kg range, and their specific dimensions are as follows: Fork width: 1150mm (fork arm length) 195mm (maximum lift height) 78mm (minimum height) 160mm (width of the fork arm), 685mm (outside width) Narrow forks : 1150mm (fork arm length) 195mm (maximum lift height) 78mm (minimum height) 160mm (wishbone width) 550mm (outside width)