Low-temperature ceramic adhesive resistant ceramic glue

Ceramic paste Features: 1. Two-component adhesives and specialty resins toughened by a modified hardener composition. 2. The anti-aging, water resistance, good toughness and high strength. 3. Can be cured at room temperature, it can also be heat cured. Application: wear-resistant ceramic top and attached equipment facade. Tack and strong, the construction process without magnets or other support measures and not fall off, optimize the construction process and reduce the construction cost. Usage: 1. Surface treatment: sanding or sandblasting sticky surface to remove dust, oil and rust, and finally washed with detergent. 2. With plastic: according to requirements will be A, B two-component mixing A: B = 4: 1. 3. Sizing: A good tune glue evenly applied to be sticky surface, then close up, and with a rubber hammer hitting again from the middle to the edges to avoid remaining air in the middle. 4. Curing: First 4h solid at room temperature, 24h completely cured (16 ~ 18MPa), such as re-heated to 80 ℃ for 2h after curing, can get better overall performance (which can be up to 30%). Packing: plastic drum, A component: 4kg / barrel, 4 barrels / box; B component: 1kg / barrel 12 barrels / boxes or 8 barrels / boxes. Transport, Storage: cool and dry place sealed storage, shelf life of one year. Transportation avoid inversion, to avoid the bump, non-dangerous goods transport. For more details, see: http: //www.mingxinnm.com