Water quality analysis JC-OIL-6 Infrared Oil Content Analyzer

First, the instrument introduction:? Infrared Oil Content Analyzer, infrared spectrophotometry, based on a sample spectral scanning, you can display and print sample spectrum and absorption peak wave number of positions that can quickly and accurately measure all water oil concentration content. The main application areas: Infrared Oil Content Analyzer applies not only to surface water, ground water, sea water, domestic and industrial waste water, and other water and soil in oil (mineral oil), animal and vegetable oils and monitor the total oil content, but also the flue gas ( catering industry fumes) the oil content monitor national standard recommended by the instrument. In addition, organic reagent purity can also be used to detect and measure economic aggregates containing different organic and CH bond component. ? The traditional component analysis to samples and then to measure the qualitative way, for a long time and can not be measured in time data. The molecular functional groups most substances absorb infrared light by spectral energy absorption and conversion easily for qualitative and quantitative analysis of the internal components of the calculation. Infrared Oil Content Analyzer precisely as a basic principle, the use of infrared spectrophotometry, based on a sample spectral scanning, you can display and print sample spectrum and absorption peak wave number of positions that can quickly and accurately measure the concentration of oil in water All content. ? Definition of oil is: under standard conditions "GB / T16488-1996" prescribed by CCl4 extraction, not adsorbed by magnesium silicate, and the wave number 2930cm-1,2960cm-1 and 3030cm-1 in whole or in part at a characteristic absorption band of the material. Animal and vegetable oils are defined: under standard conditions "GB / T16488-1996" prescribed by CCl4 extraction and adsorption material is magnesium silicate. Country according to the International Organization for Standardization (ISO) is the recommended method, formulated and promulgated the infrared spectrophotometry based "measurement of water quality oil and animal and vegetable oils infrared spectrophotometry" (GB / T 16488-1996) national standards. The standard includes two methods, infrared spectrophotometry and non-dispersive infrared spectrophotometry, but most of them are in our current use of infrared spectrophotometry. Second, the main application areas: Infrared Oil Content Analyzer applies not only to surface water, ground water, sea water, domestic and industrial waste water, and other water and soil in oil (mineral oil), to monitor animal and vegetable oils and total oil content, but also smoke gas (the catering industry fume) the oil content monitor national standard recommended by the instrument. In addition, organic reagent purity can also be used to detect and measure economic aggregates containing different organic and CH bond component. Third, the instrument parameters: 1, the detection limit: <0.12mg / L (CCl4 extract, measured directly with 5cm quartz cuvette) - surpass the OIL-8 <0.0012mg / L (water sample, using the extraction ratio 100: 1,5cm quartz cuvette) - surpass the OIL-8 2, Repeatability: ≤1% (to 20mg / L oil samples) 3, linearity: R> 0.999 4, the wave number range: 3400cm-1 ~ 2400cm-1 5, absorbance range: 0.0000 ~ 3.000AU 6, the basic measurement range: 0.12 mg / L ~ 100mg / L (CCl4 extract, 5cm cuvette) - Parameter superior OIL-8 0.0012mg / L ~ 10000mg / L (water sample, the lowest concentration by extraction ratio of 100: 1, with 5cm quartz cuvette measurement, the highest concentration using a quartz cuvette 0.5cm) - surpass the OIL-8 7, Dimensions: 550cm × 380cm × 150cm 8, Weight: 15Kg 9, power supply: (220 ± 22) V (50 ± 1) Hz 35VA Fourth, the product features: 1, removable integrated optical systems, instruments, small size, light weight, the first spectral absorption, IR characteristics to meet the requirements, good stability, high signal to noise ratio. 2, the use of electrical modulation source, which reduces the intensity of the heat source to facilitate cooling system, and because no mechanical moving parts cut light, thereby simplifying the apparatus structure, improve equipment reliability. 3, sensor signal processing using the lock-in amplifier circuit to improve the instrument signal to noise ratio and lowest detection limits. 4, the unique design cuvette for 1-5 cm cuvettes any. 5, simple structure, the instrument optics system, electrical system self-contained, high degree of integration, resulting in improved equipment reliability and maintainability. 6, easy to operate, simply click the mouse to complete a determination of the oil sample. 7, measurement speed, measuring a sample in just one minute. 8, powerful software, with automatic zero, the regression equation and other functions, the measurement data and spectra can be saved to your hard disk, you can always check, print charts. V. Other:? Instrument consists of an optical system, electrical systems, computer and data processing system. 1, the optical system is composed of a light source, a collimating lens, a mirror, cuvettes pool, grating, imaging lens, filters, pyroelectric detectors and other components. 2, the host electrical system includes a modulated light source circuit, stepper motor drive circuit, wavelength positioning circuitry, signal amplification processing circuit, analog to digital conversion circuits, single-chip computer systems. 3, computer-controlled data processing system includes a control software, measuring some software, data processing software, document management, print statements. ? Instrument preservation and use conditions: 1, ambient temperature: 10 ℃ ~ 35 ℃ 2, relative humidity less than 80% 3, the instrument should be placed in non-corrosive gas, no strong electromagnetic interference, well-ventilated, dust-free laboratory . 4, Power supply: (220 ± 22) V AC 50Hz 5, supply unstable region should be equipped with power supply. 6, the power supply should be grounded. ? Transportation and storage: 1, the product under the original packaging condition, storage temperature is 5 ~ 35 ℃ relative humidity less than 80%. 2, the instrument during transportation, should avoid strong vibration and impact. Six, related accessories and physical map:? Configuration list: No. Name Unit Quantity Remarks 1 Oil Analyzer main frame 1 2 4cm cuvette only 21 boxes 3 Mains cord root 1 4 RS232 data communication line 15 installation CD-ROM root Zhang 16 specification part 17 certification part 1