High and low temperature laboratory

MAX-STL uses high-temperature laboratory: Laboratory of the parameters can be foreign and domestic corresponding standard customized products applicable to all industries the whole, the parts for environmental stress screening, reliability qualification and acceptance test, high and low temperature heat Variable test, constant humidity test. Under simulated conditions of temperature and humidity changes are specimen adaptability to environmental conditions, and its quality and reliability testing. Technical parameters MAX-STL high and low temperature laboratory: internal tank volume: volume of space, the corresponding size, made by the customer. Tested products: Please provide product dimensions, weight, whether required power testing, heat size, the area of ??contact with the ground at the bottom of the product. Temperature range: -70 ℃ ~ + 80 ℃ ~ + 150 ℃ low value non-standard specification control accuracy: Temperature: ± 0.1 ℃ Humidity: ± 0.1% RH Temperature fluctuation: ≤0.5 ℃ temperature uniformity: temperature ≤1.5 ℃ Deviation: ≤ ± 1.5 ℃ ramp rate: 0.7C ° ~ 1.2 C ° / min (non-linear) Humidity range: 20% RH ~ 98% RH; at + 20 ℃ ~ + 85 ℃ Humidity deviation: ± 3.0% RH ( humidity> 75% RH when); ± 5.0% RH (humidity ≤75% RH when); control: Programming / setting run MAX-STL high temperature laboratory services, installation, commissioning: Pindar engineers will be ready at the buyer After the equipment required for external conditions (such as water, electricity, etc.), responsible for the installation of the equipment installation, commissioning, start work, and to provide good technical support and after-sales service, and personnel on the use of equipment on-site training to ensure trainees to be independent, skilled operate equipment and perform simple maintenance work, equipment maintenance and other routine work. Warranty: equipment warranty is 12 months from the date of entry into force date of signature of the buyer on the acceptance of the book of the computing device. During the warranty period, the seller is responsible for a variety of equipment due to equipment failure problems caused by their own reasons and for free resolved. The warranty period, maintenance of the equipment to pay the cost of spare parts and a service fee. Maintenance: maintenance response time: within 24 hours in response to the seller after receiving the fault notice from the buyer guarantee to respond within 24 hours, and for the shortest time troubleshooting as soon as possible. MAX-STL lifetime high and low temperature laboratory services: The seller promises during use of the device can be free, indefinitely to provide technical support for the device. Source: http: //www.maxpinda.com/ high and low temperature laboratory