Imported ZAS Zero Air Generator

ZAS Zero Air Generator Origin: Switzerland Description ZAS zero air station generates a large amount of laboratory-grade pure air, accurate and convenient for FID (flame ionization detector) and other detectors, such as flame photometric detector ( FPD). Taking into account security and convenient design, hydrocarbon-free air generated by this system no longer needs a bulky high-pressure cylinders. HC zero air station to remove contaminants to a concentration of less than 0.1 ppm of. The flow rate was 6 NL / min and 30NL / min. Zero air station does not need to provide an external air compressor. Operating principle: built-in pump compressed air. Once compressed air through a filter automatically combined cooling and drying. Air is delivered to a double column, by a combined automatic filter compressed and dried. Next, air is inputted into a stainless steel catalyst chamber where any background hydrocarbon or carbon monoxide to be removed. This cavity is filled with a highly effective platinum - palladium catalyst, heated to a high temperature, to ensure removal of hydrocarbons in a concentration of less than 0.1 ppm. Zero compressed air stored in an internal slot. Finally, an efficient filter to remove particles greater than 0.5 micron 99.99%. Then adjust the pressure of the air and ready to use. Once the tank pressure reaches its upper pressure level, the compressor will stop working; denier tank pressure below its low pressure level, the compressor will start operating again. Purpose: zero air station main fuel for the GC flame through the air without hydrocarbons. By using a zero air station generator, GC baseline will be low and stable, accurate measurement will give the best. Zero air station can also be used for zero total hydrocarbon analyzer. It can be used for GC-FID / GC-FPD / THC gas; for THC zero air technology parameters: 1) Flow rate: 6NL / min or 30NL / min; 2) Output pressure: up to 6 bar; 3) air purity: Total hydrocarbon content of <0.1 ppm; 4) particle filtration levels: <0.1 μm; 5) Noise: <65 dbA; 6) Stability: 45 min; 7) Connections: air outlet 1/4 "; iron mold lock; 8) User Interface: setpoint, system status, user parameter / Touch Screen / LCD graphic display; 9) Dimensions (WxDxH): 36x64x67 cm 10) Power: 230V / 50 or 230V / 60Hz or 150V / 60Hz;