SXL-70 refrigeration type oscillator supply

 SXL-70 refrigeration type oscillator http://www.shzuole.com/ Usage: First, check the instrument valve is closed, water was added to the appropriate height, and then plug in the power equipment capacity of not less than two kilowatts, the " on the ground, "the power to choose the timing of time you need to work, or choose to normally open position, function switch (Niuzi switch) allocated to OFF (which position). Press the power switch, power indicator light shows that the machine is powered on, rotating speed check button to select the desired frequency of oscillation. For heating or cooling the temperature control switch to ON, this time into the temperature status, detailed operation please refer to the manual control device. Note: The need refrigeration to below 0 ℃ speed plus the best antifreeze, antifreeze and water ratio of 1: 1. Note: Before you did not add water tank, temperature control switch can not be opened, to prevent damage to the heating pipe. SXL-70 refrigeration type oscillator Maintenance: First, when the power is turned on and the instrument does not work, it may be a belt elongation or aging due to fatigue fracture, should be replaced. Two, SXL-70 refrigeration oscillator long-term need, the water tank should be excluded, and the clean water tank, place dry and ventilated place. Third, the test water is best to use distilled water, so as not to appear inside the water pollution, affect instrument performance. Product recommendation: cryogenic cooling water manufacturers http://www.shzuole.com/