Renishaw laser interferometer

XL-80 laser system can produce very stable laser beam wavelength used traceable to national and international standards. Laser frequency stabilization by dynamic thermal control accuracy of the laser tube length change within the range of a few nanometers, up to 1 year accuracy of ± 0.05 ppm, within 1 hour accuracy ± 0.02 ppm. Linear measurement accuracy over the environment ranges from 0 oC - 40 oC (32 oF - 104 oF) and 650 mbar - 1150 mbar within the range, accuracy of ± 0.5 ppm. Up to 50 kHZ frequency read data, the maximum linear measurement speed of up to 4 m / s, even at the highest speed in linear resolution is still up to 1 nm. Instrument built-in USB means between the laser system and the computer without requiring a separate interface. Laser head the front row of LED status indicators show the laser status and signal strength, which is equivalent to the software on the screen "Status display" extended to the laser head. You can switch between the standard distance (40 m) and long (80 m) mode. Analog I / O port allows the analog signal output and trigger input. Warm-up time of less than six minutes. External switching power supply allows the input voltage at 90V - 264 V between changes. All of these features makes the use of XL-80 quick and easy. According to (IEC) EN60825-1, Renishaw XL-80 laser interferometer laser device belongs to the second category, there is no need to wear goggles. Before the first operation of this system, be sure to refer to the system manual for detailed safety information.