Onick (Ou Nika) 1500LH laser rangefinder

Onick (Ou Nika) 1500LH laser rangefinder Onick (Ou Nika) 1500LH laser range finder Product name: Onick (Ou Nika) laser rangefinder Brand: Onick (Ou Nika) Model: 1500LH 1 Purpose Onick 1500LH laser rangefinder (hereinafter referred to as DME), a combination of modest telescopes and laser range finder function, while observing the object, measurable within a certain distance of the object from the diagonal, straight-line distance, target and test point The height and tilt angle target and test points, and with a measurement time fast, intuitive data display, low power consumption, auto power off when not in use and so on. The laser rangefinder transmit low-power, eye-safe; without cooperation objectives, can have an arbitrary object distance; small size, beauty, light weight, easy to carry; use the machine section 3V battery, easy to replace. The rangefinder is widely used in golf, hunting and other sports, the distance measurement field activities; also widely used in distance measurement poles, bridges and construction sites; can be used for general topography, warehousing measurement. 2 main performance 2.1 Working range: 5-1000 m, 5-1200 m, 5-1500 m, 5-1800 m, 5-2000 m 2.2 Ranging error: ± 1m ± 0.1%; 2.3 angle measurement range: ± 90 °; 2.4 angular measurement error: ± 1 °; 2.5 Ranging method: semiconductor laser ranging (harmless to eyes); 2.6 Ranging Display: LCD display field of view; 2.7 Effective objective lens diameter: 30 mm; 2.8 membrane system : multilayer plating film; 2.9 pupil diameter: 3.6 mm; 2.10 Exit pupil distance: 13 mm; 2.11 Focus mode: eyepiece focusing; 2.12 telescope magnification: 8 X; 2.13 in the vision of 1000 m of the 122 m (FOV 7 °); 2.14 Measurement mode: BEELINE, HIGH, ANGLE, no display (standard mode); 2.15 Power: 3V (not included); 2.16 Dimensions: 148X96X58 mm. 2.17 Weight: 230g; 2.18 Waterproof: not waterproof. Measurement sign 3 symbols and functions 3.1 rangefinder mirror. 3.2 aiming mark: In the center of the field, with the "" indicates, round distance with the center of the target when aiming. 3.3 Data Display: In the field just above the three-digit; no data is displayed: "- - - -." 3.4 angle units and distance units: in the field at the top right, (degrees), "MS" (m), "YDS" (code) indicated by "DEGS". 3.5 Measuring mode: the upper left visual field, there are four states: (1) no letter display (standard mode) --- slash target distance; (2) "BEELINE" --- straight line distance to the target is; ( 3) "HIGH" --- the height of the target; (4) "ANGLE" --- the target pitch angle and test points. 3.6 Ranging quality: in the visual field just below, with "QUALITY" said, "" more than the number, expressed strong echo, general display 6 to display the distance, if less than 6 indicates a weak echo can not be displayed distance. 3.7 Laser emission: In the lower left visual field, with "LASER" he said lasing, "LASER" flashes. 3.8 Battery voltage: In the lower right field of view, when the display "BATT", indicates lack of voltage until the laser rangefinder automatically shut down or can not boot properly, replace the battery. 4 Measurements 4.1 rangefinder eyepiece diopter adjustment, so that the field of view objects clearly. 4.2 Jog "trigger" button, in the mirror "" is displayed, the central circle over the target to be detected, "pattern" is generally placed standard condition, again press and hold the "trigger" button for about 3 seconds, target distance display, if do not use automatic shutdown after 15 seconds. 4.3 In order to reliably measure back to the target, the second press the "trigger" button last for 3 seconds or more, until the target from the display, press time not too long, otherwise the fractional noise generated will be displayed. If there is still no distance displayed after three seconds, indicating that the quality difference between the target echo, then shows "- - -." 4.4 Continuous measurement using a function (depending on the model parameters measured in the state may be): Press "trigger" button, move the rangefinder, the alignment test targets within the center mirror, objective measurement parameters to be measured continuously displayed inside mirror. 4.5 Each time you press the "Mode" button once to change state. Uses various modes of explanation can select 3.5, when the power is turned on again in usage patterns. 4.6 To carry out distance unit conversion, you need to press the "mode" button for 3 seconds. 4.7 rangefinder ranging case and the nature of the measured object distance, launch angle and weather visibility beam and the target surface, in general, the target surface is smooth, bright, large, vertical beam and the target surface, the weather was sunny measured the distance away; the target surface roughness, dark, small area, inclined beam and the target surface, in the case of measuring the distance fog near. 5 Precautions 5.1 Do not open the rangefinder, in order to avoid damage to the internal circuitry. 5.2 Do not hand wipe the glass surface, use special lens cleaning cloth. Wipe the outer surface with a soft cloth. 5.3 Do not flip the battery. 5.4 should remove the battery will not be used. 5.5 is not used should be stored in a dry place. 5.6 shall be at a temperature of -20 ℃ ~ + use the range of 40 ℃. 5.7 Do not use the two buttons. 5.8 Only qualified personnel may repair the laser range finder. Do not dismantle and repair or terms of service commitment is no longer valid. 6 accessory leather box ···························· a strap ··············· ············· a lens cloth Sassafras ·························· an instruction manual · ···················· 1