Digital UV intensity meter / white light meter XRP-3000

Digital UV intensity meter / white light meter (USA) Model: XRP-3000 instrument Information: AccuMAXXRP-3000 New Digital UV intensity meter / white light meter can measure the UVA (black light) and ultraviolet intensity white light illumination. With automatic cleared, total irradiation energy, signal hold functions. Ultraviolet and provide accurate display white light intensity, in order to ensure consistent results, the sensor design has advanced bandpass filter, its optical stack 100 in the clean bench assembly. In order to obtain accurate spectral range, high-quality interference filter to slow aging. Main features: a host microprocessor control, support black light and white light sensors simultaneously detect a wider range, UVA (black light) range 0-100mw / cm2 (100000uwcm2), white range 0-5300lux. From the measurements, automatic switching range and display units. High Precision UV intensity resolution of 1uw / cm2, the highest resolution white light illumination of 0.01lux (white display unit lux or footcandles can be switched. Can display the highest intensity of UV radiation dose and exposure time and the average intensity within the band excellent pass interference filter can be directly connected to the detector on the host, or connect via USB cable to connect the detector to the excellent cosine response curve on the host user-definable power-saving mode and automatic shutdown feature large, easy to observe the liquid crystal Display seal the sensor housing, and waterproof USB connector can be used to detect X-ray brightness film viewer, the display unit is cd / m 2 (cd / m2), cd / ft 2 (cd / ft2) or feet - Lambert ( fL). Accurate XRP-3000 New Digital UV intensity meter / white light meter dual-wavelength detector can measure the UVA (black light) and ultraviolet intensity white light illumination with automatic cleared, total irradiation energy, signal hold functions. provide accurate UV and white light intensity display, in order to ensure consistent results, the sensor is designed with advanced band-pass filter, the optical stack 100 clean bench assembly. In order to obtain accurate spectral range, high-quality interference filter to slow aging. strong strong host shell with removable rubber protective sleeve, easy to hold the operation and helps prevent accidental breakage, while providing excellent moisture, shock and moisture protection. Moreover, the US SP company XRP -3000 with liquid repellent and waterproof seal the sensor housing, with special self seals help reduce light leakage. XRP-3000 is simple and easy to use microprocessor operate all functions with only four pressure on the panel Sensing button to complete the example: In order to reduce ambient light, users simply click on the "Zero" button to activate the auto zero function, the value is set to "0", subsequent measurements show the relative readings "HOLD". Hold function freezes the display, "INTG" show time after UV energy and average UV intensity. These features and other user-selectable parameters through the software's main menu and submenus can easily enter. Reliable XRP-3000 strength meter through tight quality control to ensure that its advanced calibration, demanding measurement requirements. host device in sturdy polycarbonate boxes with separate solid-state optoelectronic circuits, long-term trouble-free operation. portable XRP-3000 is compact, lightweight, battery-operated , easy to plant, site and other application areas. slide-out panel can easily replace the device 9V battery Universal XRP-3000 offers more functionality. By increasing the XS-555 / L sensor, ray technicians can use it to measure the concept of film brightness of the lamp, display units of cd / m 2 (cd / m2), cd / ft 2 (cd / ft2) or foot - Lambert (fL) Technical Specifications Host (XR-1000) resolution display unit based on the measured value automatic switching up to display four white 0.01lux (when measured value 0-29.99Lux) 0.1lux (when measured value 30.0-999.9Lux) 1lux (when measured value 1000-5300Lux) UVA (black light) 1uw / cm2 (measured When the value 0-9999uw / cm2 at) 0.01mw / cm2 (10uw / ??cm2) (measured value 10.00-99.99mw / cm2 at) screen 2.8 "LCD 128x64 pixel monochrome sampling rate 7.5Hz (single sensor) 15Hz ( When the dual sensor) reading update 2Hz full accuracy of better than ± 5%, according to NIST (National Metrology Institute) standard temperature coefficient of ± 0.025% / ° C (0-50 ° C) dual wavelength detector (XDS-1000) range UVA0 -100mw / cm2 (0-100000uw / ??cm2) visible 0-5300lux (0-500fc) Power Requirements Battery operating two non-rechargeable 9V alkaline battery (included) Dimensions hosts length 7.75 "(19.7cm) width of 4.25" (10.8 cm) thickness of 1.25 "(3.2cm) Weight 0.8 lbs (360 g) sensor probe length 4.73" (12.1cm) Width 2.0 "(5.1cm) Thickness 7/8" (2.2cm) by weight of 0.22 pounds (100 grams) USB Connection 5 feet (1.5m) with an adapter kit includes a waterproof USB connection XCB-100 host the rubber boot XRB-100 suitcase XCC-100 XS-555 / L sensor range 0-1,000,000cd / m2 0-90,000cd / ft2 0-285,000fl size 3.0 "x2.1" x3.2 "(7.6cmx5.3cmx8.1cm) (L x W x H) Weight 181 grams (6.4oz)