Shenzhen HS-100 on-line dust concentration monitor Ao Sien automatic smoke detection line ..

Technical Features: ● the principle of backscattered laser beam refractive index is not afraid of the flue and the flue gas temperature mechanical vibrations caused by uneven caused by uneven swing. ● Single-side installation, without optical alignment. ● with on-site display that can be read directly at the site of dust concentration. ● After a modulated laser beam, making the anti-jamming capability can be greatly improved. ● instrument design implementation of the "no tool" on-site installation of thinking, minimizing the complexity of the installation site installation, equipment, and electrical connections rain systems only need a screwdriver, do not take the connecting bolts, nuts, in 10 minutes complete installation to minimize problems caused due to the on-site installation. ● standard (4-20) mA industry standard current output, easy to connect. ● instrument overall power consumption is very small, about 3w. ● general criteria set parameters applicable to the flue wall thickness of less than 400mm, flue diameter greater than the instrument designer label, under special request condition measurement zone size can be customized. The user can also recognize and guidance by maintenance personnel under adjustment. Note : HS-100 uses a 128x64 graphic type LCD display, when the need to adjust the contrast of the LCD display can be adjusted by adjusting a potentiometer on the front panel. Class project performance mechanical properties of aluminum alloy body, surface oxidation black Dimensions (see structural drawings) Weight 10KG protection IP65 measuring performance accuracy ± 2% FS repeatability of ± 1% FS range 200mg / m3,10g / m3 can be set, or a custom chimney width (1-15) m, customizable power <3W temperature Ambient temperature (-40 to 70) of the highest flue gas temperature of 600 degrees (higher temperatures to be customized) interface features an analog output all the way ( 4-20) mA, maximum load 800 Ohm, optional two-way (4-20) mA Digital Interface RS485 (optional) 2 relay outputs (optional), 2A / 30V interactive infrared remote control + big screen LCD display option weatherproof cover purge unit remote data recording unit