Type NKS-2 blast furnace hot metal composition analyzer fast

The main parameters: Temperature range: 1250 ℃ ~ 1350 ℃ measurement range: carbon equivalent 3.2 ~ 4.8 ± 0.2% carbon content of 2.8 ~ 4.2 ± 0.08% silicon content of 0.9 ~ 3.0 ± 0.2% Main features: work through an improved evaluation method can automatically control the important metallurgical parameters make up "spectrum" is difficult to measure accurately insufficient nonmetallic elements (C, Si), the routine analytical instruments and can not meet the Front rapid analysis time requirements to meet the casting production quality control requirements. ★ NKS-1 in type on the basis of the detection software intelligent upgrade and increase the print function to print out ★: carbon content, silicon content, carbon equivalent, peak temperature, liquid temperature, solidus temperature, eutectic degrees, Silicon adjustment, too cold, maximum subcooling, tensile strength, hardness HB, quality factor, graphite-based factor, eutectic graphite Tuan Su ★ Application features: white mouth, gray cast iron C%, Si%, CEL, SC, △ T, △ TM ★ display numbers and other measuring height: 500mm ★ temperature compensation range: 0-15 ℃ ★ supporting sample cup type: K type ★ measurement accuracy: ± 1 ℃ ★ Display Temperature Unit: Fahrenheit or Celsius temperature Set ★ measure the maximum time: 240 seconds ★ measurement status display: the meter "ready" green light, "Measure" yellow light "to complete the" red light cycle