KM950 handheld flue gas analyzer

KM950 gas analyzer Introduction 2 Applicable boiler combustion emissions testing and monitoring of two hand-held, full Chinese display simple, easy field use 2 can measure O2, SO2, NO, NO2, CO, flue gas temperature, ambient temperature, flue pressure, total efficiency, 2 automatic calculation of flue gas velocity, CO2, NOx, net efficiency, the total loss, net loss, excess air factor of 2 built-headed powerful suction pump can be guaranteed to work in a high vacuum, fast response time 2 CO, SO2, NO, NO2 sensor flexible combination, easy to upgrade 2 showed the percentage concentration, ppm and mg / m3 2 can be set to any conversion of different gas components measuring internal alarm limit 2 special air route design to minimize the test in SO2, NOx losses 2 automatically according to the flue gas sensor cross-talk status Amendment 2 large screen display, backlight convenient instrument in dim normal conditions by using two pressure measurement is displayed directly after the flue gas flow rate of 2 boot without Press any key to go directly to the test interface, easy 2 AC and DC, full charging time can work 6 hours of continuous 2 data storage. 2 2 IR remote print mode built-in automatic calibration program to facilitate the user to calibrate 2 User definable Technical specifications print resolution accuracy range Description flue temperature 0.01oC 0.01 ℃ ± 0.3% of reading 0-1200oC> 600 ℃ ambient temperature with high temperature probe 0.01oC 0.01 ℃ ± 0.3% of reading -50 ℃ ~ 50 ℃ pressure 1pa ± 2.0% of reading ± 15000pa over range ± 25000pa gas measurement O2 0.01% ± 0.2% of reading O2 0-25% in addition to outside (O2 mandatory test items), the user can at any required SO2, NO, NO2, CO four kinds of sensors Option 1-3. Measuring range to choose from, but can not select both the concentration of the same sensor. CO 1ppm ± 5% of reading 0-10,000ppm NO (standard range) 1ppm ± 5% of reading 0-5000ppm NO (low range) 1ppm ± 5% of reading 0-200ppm NO2 1 ppm ± 5% of reading 0-1000ppm SO2 (Standard Range ) 1ppm ± 5% of reading 0-5000ppm SO2 (low range) 1ppm ± 5% of reading 0-200ppm automatically calculate CO2 0.1% ± 0.3% of reading 0-99.9% NOx 1ppm ± 5% of reading 0-6000ppm loss of 0.1% ± 1.0% reading 0-99.9% combustion efficiency 0.1% ± 1.0% of reading 0-99.9% excess air ratio 0.1% ± 0.2% 0-2885.0% net temperature 0.01oC 0.01 ℃ ± 0.3% of reading 0-1200oC flue gas velocity ± 0.1m / s ± 2.2% of reading 2-45 m / s calculated based on the pressure and temperature of the flue