Rui Wen marketing low-frequency vibration test machine vertical and horizontal vibration table shaking table transport

RW-8753 a low-frequency vibration test machine, the product is suitable for: testing of electrical and electronic appliances, vehicles, aviation, communications and other finished products or components that may be encountered during transport vibration design, which assessed the results of the primary products and the packaging is sufficient strength or protection can meet the needs of long-distance transport. Second, the main parameters: 1, the maximum load (kg): 30 / 50,80 / 100 2, table size (mm) :( L / W / H) = 450 * 350 * 20,600 * 500 * 30 3, FM Range (Hz): 50 4, the vibration mode: 5 vertical amplitude (PP): 0-2mm 6, the maximum acceleration (m / s2): 1-999 7, located at the range (s): 400 * 380 * 300, 400 * 380 * 300 Power consumption (KVA): 0.75,1.2 8, Cooling: 9, the power supply voltage (V / Hz): 220/50 / ± 2% 10, standard: GB / T2423.10 RW-8751A Mechanical vertical and horizontal vibration table I. Product Overview: The machine uses centrifugal exciter, supported by the air spring vibration table do experiments, vertical and horizontal vibration in both directions can be achieved widely used in national defense, aviation, aerospace, communications,. electronics, auto, appliance and other industries, the type of device for detecting early failure, analog actual condition assessment and structural strength test, this series of wide range of products for wide test results are obvious and reliable. Second, the technical parameters: 1, the maximum test load (Kg) 100 2, frequency range (Hz) 0-60 adjustable 3, sweep range (Hz) 0-60 4 adjustable, no-load displacement amplitude (mm ) 55, vertical + horizontal vibration direction (a table, vertical, horizontal switchable) 6, vibration mode fixed frequency sweep. 7, the vibration direction switching manual switching 8, located at the range (s) 1-360000 9, output sinusoidal waveform 10, the frequency LED display real-time display (drive control display) 11 hours 0 ~ 9999H preset stop, real-time display of work time, work table size (mm) (L / W / H) 13, Taiwan Size (mm) (L / W / H) 600 * 700 * 650 14, control box size (mm) (L / W / H) 450 * 330 * 700 15, power supply voltage (V / Hz) 380V / 6A 50HZ ± 2% 16, power consumption (KVA) 1.2 17, cooling air-cooled 18, standard GB / T2423.10 19, image see table for reference only, to prevail in kind RW-8750A Analog Motor Transport Vibration Table I. applicable Scope: This machine is suitable for toys, electronics, furniture, gifts, ceramics, packaging and other transportation industries tested to simulate transport, in line with US and European transport standards vibrations. Implementation of the standards: ASTM999.9.2, Standard, GB / T4798.2. Second, the main parameters: 1, vibration frequency: 150-300 (rev / min) adjustable (error ≤10%) 2, amplitude: (25.4MM), (error ≤10%) 3, maximum load: 100kg (or agree ) 4, the effective work table size: 1.0 × 0.9 (M) or order 5, the time set: 0-99.99 (H / M / S) 6, motor power: 1HP (DC) 7, the power supply voltage: AC220V, 50Hz, 2A