Rubber and plastic aging test machine oil sale / Guangdong precision silicone oil tester ..

Rubber and plastic aging test machine oil sale / Guangdong precision silicone oil resistance testing machine manufacturers Spot rubber and plastic aging test machine oil according to the standard: UL-1581, GB / 1690, CNS3562 rubber and plastic aging oil tester test mode: the specimen is immersed in hot oil for some time to remove the specimen, test its tensile strength, such as the specimen is enameled it may examine the film quality. Guangdong precision silicone oil resistance testing machine manufacturers Spot main technical parameters: Temperature range: room temperature ~ 300 ℃ (can be set) digital display resolution: 0.1 ℃ Temperature fluctuation: ± 2 ℃ Time control: 0 to 99 hours 99 minutes ( controlled) Power supply: AC220V 50Hz test cup:??? 220mm (depth) × diameter 50mm × 6 pumps Flow: inner loop Carton size: 555x510x350mm Note: When testing insulation oil in the heating process, a small amount of fumes evaporate, it is recommended that this test will be placed in a fuel tank is not less than 0.5 cubic fire space (not included). Customers need their own equipment: an exhaust suction fan, timely exhaust fumes. Special test oils (volatile, low boiling oil) should be equipped with appropriate fire-fighting equipment to prevent accidents. Before another test specimens shall be at GB / T2941 provisions of the standard laboratory temperature regulation not less than 3h, any test or series of comparison tests, the test before and after the temperature should be maintained. Rubber products tensile strength testing machine, rubber products anti-wear strength testing machine, impact strength testing machine rubber products, rubber products high temperature melt index tester