Supply air booster pump - pressurized equipment manufacturers

I mainly design and manufacture of gas drive liquid booster pump, air booster pump, gas booster pump, high pressure pneumatic system, pneumatic pressure testing equipment, oil (gas) field specialized control testing equipment, cylinder testing equipment, constant pressure relief valve check station, CNG vehicle for testing equipment, fluid pumps, valves and other fittings. At present our series of products has reached the advanced level, and innovation, and gradually with international standards. For more inquiries, please contact: 18353158286; 0531-68858270; Huang workers (project manager); QQ 916112332. Or visit: http: //3701186556.mye2e.com/ View (goods and services) list. Gas pressurization system equipment gas booster product features and applications: multi-gas drive: compressed air, nitrogen, steam, natural gas, etc. can be used as a pump driven air supply. Wide range of applications: in industry for machine pneumatic chuck clamping, accumulator charging, high-pressure inflatable bottle, the low-pressure gas is converted into high-pressure gases. Where air pressure is high enough, whether it is industrial machinery or test equipment, can use System are willing to air gas booster pump. Automatic packing: regardless of the cause dwell loop pressure drop, System are willing to pump will start automatically supplement leak pressure to maintain circuit pressure constant. Operational safety: the use of gas-driven, no arc and sparks, exclusively for flammable, explosive properties of liquids or gases. Maintenance is simple: with the other gas drive pump compared to pumps System are willing to do the same work, but few of its parts and seals, and easier to maintain. Cost-effective: System are willing to air gas booster pump is a piston pump, at work, gas booster System are willing to work back and forth rapidly, with the increase of the output pressure reciprocating pump speed slows straight stop to stop, this when the output pressure of the pump is constant, the lowest energy consumption, the parts stop moving, because of its simple piston pump structure, it is easy to maintain. Security Warning shineeast products may only be used under specific working environment. Hydraulic lines and spray or burst pipe may exist. Before starting work to check the pipeline equipment enclosure for damage, if there is tearing, folds, cuts, loss, wear, embrittlement and so on, should be allowed to carry out maintenance professionals. In the selection of lubricants and filtration media, please pay attention to environmental protection, personal safety and health and compliance with emission regulations. When the device is working, do not touch any part of the body of the moving parts. When the device does not work, it should cut off the gas supply. Enter the maximum pressure must not exceed the rated maximum pressure. Equipment installation 1. Installation: The installation process, please refer to the technical parameters of the size of each interface, to avoid foreign body into the pump, keep the import and export of clean. 2. The air quality standards: Please select a clean air supply to the pump to ensure a steady job. 3. The air lubrication: pump at the factory, all moving parts have been put on the right amount of lubricant, generally no longer require lubrication, such as long-term use of dry compressed gas drive is recommended to add the right amount of oil in the cup two conjoined oil , oil mist lubrication. 4. Air pressure: The minimum driving pressure of the pump is 1.5-2bar, designed to drive maximum pressure 10bar. We recommend using air pressure between 6-8bar. The pressure regulator can be adjusted to meet pressure requirements. Driving pressure pump must not exceed 10bar, if it is driven by the gas pipeline, there must be reliable valve and safety valve. 5 connecting line: According to the pump output pressure, flow, select the appropriate import and export connection pipe, ensure the pump can withstand the maximum output pressure, flow rate. Pump driving port connecting pipe diameter should be slightly larger than the pump driving port connecting thread of nominal size, if the connection path becomes small, will greatly affect the efficiency of the pump!