Key Load load stroke stroke profiler profiler instrument parameters stroke curve

RW-693A a key instrument load stroke curve, the machine features: use of this machine is suitable for [load - displacement] various buttons and switches of the curve testing using WINDOWS Chinese window writing set, simple operation, and all data Jieke Storage (test conditions, load curve, the test results, inspection reports, and so on ...). The machine uses opportunistic servomotor drive can provide high accuracy of [the Netherlands was - displacement] determination. You can get a completely accurate test buttons and switches curve. Second, the machine specification: according to test product designs. Third, the machine parameters: 1, the test load types; 2kgf, 500gf (optional 1) 2, the smallest display load: 0.01gf 3, the maximum test stroke: 100mm 4, the minimum display itinerary: 0.01mm, 0.001mm (optional) 5, measuring speed range: 0-100mm / min 6, transmission: Ball screw 7, the drive motor: servo motor four, Machine features: 1, Peak Force, ReturnForce, Distance and Click rate, etc. can be displayed directly on the chart values , do not need manual calculation. 2, the measurement curve by the computer memory, you can always zoom, an A4 paper can be specified to place the N curve. 3. Determination of the project can be entered, the lower limit specified value, the measurement results can automatically determine the OK or NO. 4, enter the maximum measured stroke and load, the computer automatically controlled. 5, load unit display N, Ib, gf, kgf free to switch 6, direct printing and storage load computer - stroke curves, inspection reports. (No graph paper, general A4 paper can be) 7, the test data stored on the hard disk (each piece of data can be stored, unlimited) 8, the test conditions chosen by computer screen settings (including testing stroke, speed, times, air, dwell time, etc.) 9, test report content can be modified at any time rise (in Chinese or English) 10 inspection reports can be generated automatically, do not need further input. 11, inspection reports and other documents can be converted to Excel report format.