Shenzhen factory dehumidifier intelligent controller shelf and provide OEM support

Custom processing: Brand: Other Model: KH-800E type: resistive operating voltage: 110-220V (V) overload current: 5A (A) Operating temperature: 10 (℃) lifetime: 10000 (times) properties: KH -800E dehumidification controller specification an overview of KH-800E intelligent dehumidification controller can monitor the indoor temperature, humidity, built-in inlet temperature and humidity sensors, relays the signal output, the use of advanced micro-computer chips and software and hardware technology, with digital humidity sensors, to achieve automatic control humidifier or dehumidifier, through patented technology of digital line processing circuit, with high accuracy, wide humidity scope, stable performance, long and so ordered. It can be widely used in humidifiers, dehumidifiers manufacturers supporting the use. This product can also be used in other industries humidity measurement and control of economic and practical features, two Key Functions 1. Key: Mode key 2 key: increase key 3 key: down Key 4: Turn the power key for three, a detailed description 1. Switch machine: Every time the controller after power is turned on, alternately displays the current ambient temperature and humidity; press the power button to turn off the controller, the controller displays OF; press the power button again to turn the controller. 2, dehumidification start value is set: In normal working state, press or to enter the dehumidifier start value is set, the original location is displayed on the display humidity and flash settings by pressing or keys to adjust the value adjustment range of 30% -90%, the key Exit setting state. Appears on the screen long button for two seconds to lock symbol set parameters are not allowed to adjust the humidity setting. Long press the button for 2 seconds will unlock. 3, the backlight: backlight turn-key operation when there is no key operation delay of 10 seconds after turning off the backlight. 4, the output signal: Controller is shut down, COM contact and NO1, NO2 contacts open; boot COM contact and NO1 contact connected, when detecting the humidity is greater than the set humidity value, COM contact and NO1, NO2 contacts connected. V. Technical Specifications * Dimensions: 86 × 86 × 40mm * Response time: ≤60 seconds * installation pitch: 60mm (standard) * Recovery time: ≤60 seconds * Terminals: Maximum 2.5 mm2 wire * Operating Temperature: -10 ℃ --- + 50 ℃ * Rated voltage: AC220V 50Hz * Working humidity: 5% RH - 90% RH (non-condensing) * Standby power consumption: ≤0.5W * Storage temperature: -10 ℃ --- +60 ℃ * Output interface: dry contact relay output * Storage Humidity: ≤60% RH * Temperature display range: -9 ℃ - + 50 ℃ * life: ≥ 10 years * Humidity display range: 25% RH - 90% RH