Oil-bearing hydrometer / tester 5 seconds direct reading

Xiamen Long Instrument Group Co., Ltd. --- Mobile: 18259451000 ---- 24-hour online QQ: 184 0302 44 ----- Contact: Mr. Chen ------ Main: rubber density meter, ceramic hydrometer liquid density meter, solid density meter, density meter powder metallurgy, magnetic density meter, the powder density meter, plastic hydrometer, PVC density meter, the powder true density meter hydrometer variety of analytical instruments, insulation material density meter, flux , eps styrofoam densitometer, PU EVA foam density meter, PU foam products made densitometer, activated carbon density meters, liquid density meter, sodium chloride density gauge, electronic alcohol density meter, wood density meter, large range density meter, multi-function Product Description: oil bearing oil rate tester powder metallurgy parts oil content of oil-bearing tester hydrometer density meter seals seals proportion of copper bearing oil content meter tester iron-based oil bearing oil bearing oil content meter to tester PM parts oil content detector principle: according to ASTM B328; MPIF Standard45; JIS Z2506; GB / T 5163. Archimedes principle of buoyancy method, accurate, rapid measurement values. Oil bearing oil rate tester powder metallurgy parts oil content detector features and specifications: Model: TW-204S weighing range: 0.0001g-200g weight accuracy: 0.0001g density resolution: 0.0001 g / cm3 Function: The computer on-line can be directly read the green density, sintered density, porosity, oil content standard interfaces: RS-232 Note: Standard accessories: computing vendor-supplied software CD-ROM: XP computer an oil content of oil-bearing powder metallurgy parts tester detector for oil content to: powder metallurgy oil bearing, new materials research laboratory GB / T 6163 specification: impregnating handler density: The sample was immersed to a temperature of 65 ± 5 ℃ hot oil until no bubbles appear, cooled to room temperature, remove the sample , which was attached to the surface of the oil gently wipe. Oil content: The sample was placed in a container, reducing the pressure inside the vessel is less than 20 minutes and held 4Kpa, the oil which has been heated to a temperature of 90 ± 5 ℃, and injected into the sample container is completely soaked. Keep up in this state under reduced pressure for 30 minutes and then returned to normal pressure. Samples were removed when the oil temperature returns to normal temperature, it will be attached to the sample of the oil gently wipe. Our densitometer inexpensive, very much, the full range, the most professional equipment suppliers density [Xiamen Long Instrument Group Co., Ltd.)! (At the same time the long-term recruit national distributors, agents expect to discuss cooperation Contact:! 18259451000 QQ: 184030244 Chen)