Agricultural micro-irrigation | GuanXian micro-irrigation | Run-spray irrigation Factory

 Water-saving irrigation equipment for agriculture has a significant role in water-saving micro-irrigation, one day be able to prop up agriculture, irrigation equipment in the ground is carried out? Underground water-saving irrigation: use pipes buried in the ground, water is introduced into the soil root vegetables distributed by capillary action from bottom to top or to the surrounding wet soil. This irrigation method is soil uniformly moist micro-irrigation sprinklers, micro irrigation does not destroy the soil aggregate structure, non-compacted layer, ground less evaporation, water, high irrigation efficiency, can perform other jobs at the same time, low air humidity near the ground, can effectively disease control and so on. Factory Linyi Run-spray irrigation water-saving irrigation industry is a professional company. The company's main products are: Recessed drip irrigation, drip irrigation, sprinkler irrigation belt, emitter, nozzles, and other steady flow of irrigation and filter header system equipment, and supporting the production of a variety of PVC, PE pipe fittings and transport hose. The company is strong in technology, can contract engineering design, technical guidance and other tasks. Linyi Run-Factory is a professional spray irrigation drip, drip irrigation and other equipment manufacturers, product sales throughout the greenhouse micro-irrigation, by the praise. Higher drip irrigation system installation requires technical requirements: (1) according to the design documentation requirements, a comprehensive check device type, size, quantity and quality, prohibited the use of substandard products. Drip tape to be mounted should be kept clean, can not be tossing plastic pipe, drag and exposure. (2) according to the design requirements and the flow of marking install water meters, valves, filters. Straight threaded connection between the filter and manifold. (3) threaded fittings required when installing the tape wrapped around the student, through the locking nut should be tightened. (4) The bypass is installed first in the manifold with special hole punch punch. When drilling, hole punch can not tilt, drill into the pipe depth should not exceed 1/2 of the diameter; and then pressed into the bypass manifold. (5) by a length slightly larger than the plant row crop drip irrigation (with), emitting pipe (with) arranged in a row along the plant, and then connected to one end of the bypass. (6) drip tape installed, open the valve rinsed with water pipes and close the valve; the drip irrigation (with) plug security in the drip tape ends; the branch pipe plug security in the branch pipe ends. (7) the whole drip system installation sequence is as follows: valves, filters, direct, manifolds, drilling, bypass, drip irrigation, flushing pipes, plug. The above information is provided by drip irrigation for your factory, we hope for your help! Agricultural micro-irrigation | GuanXian micro-irrigation | Run-spray irrigation Spray irrigation Factory Factory provided by the Run-Linyi. Linyi Run-spray irrigation Factory (www.runtong.com) (www.runtong.com) strong, credible, in Linyi, Shandong, micro-irrigation machinery industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Runtong spray irrigation Factory and you hand into the brilliant, for a better future!