Supply Fluke Infrared Ti9

Ti9 Infrared This high-performance, fully radiometric imager designed for harsh environments and optimal design, very suitable for electrical installation, troubleshooting work and mechanical equipment, process equipment, HVAC / R equipment and others applications. Design engineering design optimization for field use in harsh environments, tested to withstand 2 m (6.5 ft) drop - the last time you dropped a tool is what time? Dustproof, waterproof - IP54 degree of protection needed to provide fast found fault clear, sharp images Excellent thermal sensitivity (NETD) can be found in extremely small temperature difference (it probably indicates that failure) and intuitive, using a simple 3-button menu - with a thumb easy navigation kit provides all the tools needed to work adjustable strap - suitable for left- or right-handed operation in USA Details Specifications Temperature temperature range (-10 ° C or less without calibration) -20 ° C ~ +250 ° C (-4 ° F ~ + 482 ° F) heat radiation of the whole imaging performance Field of view is 23 ° × 17 ° Spatial resolution (IFOV) 2.5 mRad Infrared minimum focusing distance: 15 cm (6 in) focus Manual Image frequency 9 Hz refresh rate Detector type 160 × 120 focal plane array, uncooled micro bolometer infrared lens type 20 mm F = 0.8 lens Thermal sensitivity (NETD) ≤ 0.2 ° C @ 30 ° C (200 mK) Infrared spectral band 7.5 μm ~ 14 μm image display palette iron red, rainbow colors, high contrast and gray Level and span strength and smooth automatic or manual scaling span Minimum span (in manual mode) 5 ° C (9 ° F) The minimum span (automatic mode) 10 ° C (18 ° F) image storage media and data storage SD memory card, you can save at least 1200 .IS2 format image file format non-radiation (.bmp) or fully radiometric (.is2) Non-radiation (.bmp) image file does not need analysis software SmartView? software export file formats JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF