Wholesale authentic Shen Lung Wah Oxygen Regulator Gas Regulator YQY-07 oxygen meter oxygen reduction ..

(A) Use of this product is capable of high-pressure gas cylinders after the decompression device within reduction for use. Products in the input pressure and outlet flow change in working conditions, can maintain a stable output pressure. (Ii) the use of a security, should the cylinder is fixed to the wall, pillar or car, be sure not to make cylinders overturned on the ground. 2, use should be confirmed before regulator is intact and check for oil contamination. If the presence of oil to be cleaned by a professional. The Regulator (especially at the entrance) impurities, dirt and dust should be removed. 3, check the cylinder valve if there is oil pollution, the thread is damaged, if there are impurities, dirt exists. If there is the presence of oil or thread damage should no longer use the cylinder and notify the gas supply unit such cases. Clear the cylinder valve (especially valve mouth) impurities, dirt and dust. 4, the pressure reducer mounted on the cylinder valve, put all connectors wrench. 5, before opening the cylinder valve to take pressure reducer adjustment screw counterclockwise to adjust the spring pressure is not reached. 6, do not stand in front or back of the regulator when opening the cylinder valve. The cylinder valve should be opened slowly to the high pressure gauge shows the tank pressure reading. 7, clockwise rotation regulator adjustment screw, the low pressure to the desired working pressure expression. If too high, it should loosen the adjustment screw, re-adjust after the release of a portion of the gas. 8, to check for leaks, put the cylinder valve closed, then the adjustment screw counterclockwise spin out lap. If the high pressure gauge reading decreases, so that the high-pressure regulator or the cylinder valve leak part. If the low pressure gauge reading decreases, so that the low-pressure part of the pressure reducer or reducer piping and equipment leaks behind. If the high pressure gauge reading decreases, while the low-pressure gauge reading rises, then that pressure reducer valve seat leakage. Above leak Leak good results are available and secure solution leak. 9, gas cylinders when not at any time the cylinder valve closed. After the end of the work, first close the cylinder valve 10, a pressure reducer can only use gas requirements. 11, a pressure reducer should be used strictly enforce national labor Administration issued the "Gas Cylinder Safety Supervision." 12, was found matching gauge pressure reducer or damaged or abnormal should be immediately repaired. 13, pressure reducer repairs must be performed by professionals. Contact: Miss Ran Contact: 13528190265 QQ: 1776138181