Hebei table with three calibrator manufacturers

Table with three calibrator installation requires detection of the mounting element should ensure the accuracy of the measurement, a representative selection of the installation location. Detecting element should have enough depth, the sensing element should not be inserted into the corners media to ensure that the detection element and the measured medium can sufficiently heat exchange. When measuring pipeline medium temperature sensing element is located in the center of the flow rate of the working end of the pipe at the maximum, the detection element should be installed facing the direction of fluid flow, non not have the time, do not be installed downstream with the measured medium, or prone to measurement error; measuring negative pressure pipe (or device) temperature, we must ensure tightness, the free outside air intake and loss of accuracy. I believe everyone on the table with three calibrator installation guidelines should have a correct understanding, and, in use, to avoid errors. All are welcome to Weifang Huaqi Instrument Manufacturing Co., study, discuss Address: High-tech Zone in Weifang City Wolong Street 117 Contact: Mr. Tan Tel: 13605363525 Website: http: //www.do30.com/ http: // www .d030.com.cn