Beijing HX-CZUL magnetostrictive level gauge manufacturers

Model: HX-CZUL an overview of the product imported chips and advanced production technology, improved technical staff, product design is reasonable, easy to install, compact structure, environmental adaptability, and rescaled without periodic maintenance. With high accuracy, good stability, high reliability, output signal and diverse, long life, safe and reliable. Widely used in monitoring, alarm and control industrial process control, petroleum processing, pharmaceuticals, food processing, water treatment, gas stations and other areas of underground inventory of the physical parameters of level, temperature, density, interface and so on. Works Two works magnetostrictive level sensors: generating a start pulse from the inside vault electronic circuit, when the start pulse propagation in the waveguide filament, while producing a rotating magnetic field along the waveguide direction of the wire, when the Agency magnetic field and magnetic pickup or float a permanent magnetic field meet, magnetostrictive effect, the waveguide wire twist occurs, the twist is installed in the vault of the perception and converted into a corresponding current pulse By electronic circuit calculates the time difference between two pulses can be measured accurately measure the displacement and level. Three main performance parameters of normal operating conditions Ambient temperature: -20 ~ 80 ℃; Relative humidity: 5% to 100% (including direct wet); ambient pressure: 86kPa ~ 108 kPa; Range: 0-12 meters (according to user request); Power supply: 24VDC; signal output: 4-20mA standard current signal; measurement accuracy: ± 1mm ??or 0.3% FS (current output type); Working pressure: ≤ 4.0Mpa; media requirements: Density ≥0.5g / cm3 the viscosity ≤0.05Pa.s; Operating temperature: T1: 0 ~ 70 ℃, T2: -25 ~ + 80 ℃, T3: -40 ~ + 85 ℃; repeatability error: better than 0.01% FS; Resolution: excellent to 0.1% FS Hysteresis: better than 0.1% FS Temperature Effect: ± 0.07% FS / ℃ Zero adjustment range: 20% FS full scale adjustment range: 20% FS Frequency response time: 0.2 ~ 5ms (based on range size); Connection: flange connection; proof mark: flameproof: EXd Ⅱ CT6 Housing Protection grade: IP65 measuring rod pressure: ≤34Mpa