LC11 Series oval gear flow meter - Zibo Bai Si-Automation Instrumentation Co., Ltd.

LC11 series of oval gear flow meter system cumulative direct reading instrument, is the sum of the liquid flow through the pipeline in the measurement volume flowmeter. It can be widely used for flow measurement of petroleum, chemical, pharmaceutical and health departments. Features 1, high precision, less affected by the viscosity of the liquid; 2, before the table without having to install straight sections. It works under the influence of fluid pressure at both ends of the measuring chamber Importers instruments, a pair of oval gear gyrate and discharge the liquid in the shaft, measuring the number of revolutions of the oval gear can know the total value of the liquid flowing through the meter. Works Model LH ??DO DN φD LC11-15 170 230 φ65 φ15 φ14 LC11-20 200 234.5 φ75 φ20 φ14 LC11-25 260 250 φ85 φ25 φ14 LC11-40 245 270 φ110 φ40 φ18 LC11-50 340 325 φ125 φ50 φ18 LC11-80 420 370 φ160 φ80 φ18 LC11-100 515 470 φ180 φ100 φ18 Note: 1. The meter can be installed horizontally or vertically, but the oval gear shaft should be installed horizontally. 2. The flowmeter body material cast iron (common type, is mainly used for measuring the oil medium), stainless steel (anti-corrosion) 3. To prevent the measured medium debris stuck flowmeters, you must install a filter in front of the table support use. Dimensions Model Specification Technical Specification LC11-15 LC11-20 LC11-25 LC11-40 LC11-50 LC11-80 LC11-100 diameter mm 15 20 25 40 50 80 100 flow range m3 / h 0.15 ~ 1.5 0.3 ~ 3 0.6 1-6 2.4 1.5 ~ 15 ~ 246 ~ 6010 ~ 100 basic error limit% ± 0.5 ± 0.5 ± 0.5 ± 0.5 ± 0.5 ± 0.5 ± 0.5 Nominal pressure MPa 1.6 1.6 1.6 1.6 1.6 1.6 1.6 Medium temperature ℃ -20 ℃ ~ - + 80 ℃ Max flow pressure loss when MPa 0.05 0.05 0.05 0.05 0.05 0.05 0.05 minimum scale value L 0.1 0.1 0.1 1 1 10 10 Selection Description Model caliber additional configuration LC11- 15-100 (DN15-100) -P (pulse output ) -I (current output) -Z (zero return header) -B (stainless steel gear) -BB (stainless steel) -N (high viscosity gear) -T (high temperature)