US wholesale prices Supply UV detector C7027A1049

UV Supply UV detector C7027A1049 US wholesale prices UV flame detector used in various industrial furnace burners security combustion control, it will only perception generated by the burner flame, and not such as: the sun, the light and the furnace wall, etc. infrared heat generated artifacts affected. Used in conjunction with automatic ignition controller, you can achieve a variety of combustion flame monitoring (turn off automatically when the ignition, turn off gas supply turned off, alarms and other functions), the burner can burn under normal safe state. C7061 series of dynamic self-checking UV flame detector dynamic self-checking flame detector with the product R7861 Dynamic Self Test amplifiers commonly used for ultraviolet ray detection due to gas, oil produced by burning various types of fuel. US Supply UV detector C7027A1049 wholesale price? Oscillation shutter block ultraviolet arrive ultraviolet sensors, ultraviolet sensors play a self-test function. ? 7800 series controller via CR7890B internal microprocessor controller amplifier circuit element detection. ? Can be installed horizontally to any angle between vertical. (Horizontal and vertical)? This detector has panel mounting direction control point to the correct operation of the shutter mechanism. ? Sense ultraviolet field replaceable quartz test tube and test port. ? Suitable connecting pipes and color coded wire to allow quick electrical connector. ? Two detectors can be connected in parallel, so that greatly reduce the difficult to observe but failed to shut down the meter rate. ? Thermal insulation is installed into the flange. ? With -40F (-40 C) rated ultraviolet sensor. Description: UV flame detector applications: gas burners; oil burner compact flame detector, with fire safety controller and the UV flame signal amplifier complete control of the flame. ? Honeywell flame safeguard for the host controller and the UV flame detection needs to be on the burner. ? Through a combination of interface installed on a C7027? Inch pipeline observation. ? Difficult to observe when the detector, can be connected to a plurality of parallel. US Supply UV detector C7027A1049 wholesale price? When properly installed, C7027 seal will withstand up to 5psi (34.5KPa). ? Due to its compact size, allows the installation of air duct. Applications: coal-fired burners, gas burners, oil burners installed: a combination nut for mounting the vibration level observation inch pipeline:? 0.5g maximum circuit connection: 2 NEC Class 1 wire Ambient temperature range: 0 F to 215 F (-18 ° C to + 102 ° C) Description: detecting combustion produced when ultraviolet rays ancillary products: Flame Amplifiers (R7149A, BR7849A, B, R7749B, R7259, R7290) C7027 selection table C7027A1023 environment -18 ~ 102 ℃ Lead length 2.4 m C7027A1031 environment -40 ~ 102 ℃ lead length 2.4 m C7027A1049 environment -18 ~ 102 ℃ lead length 2.4 m C7027A1064 environment -40 ~ 102 ℃ lead length 7.3 m C7027A1072 environment -40 ~ 102 ℃ lead length 2.4 m C7027A1080 environment -18 ~ 102 ℃ lead length 2.4 m Supply UV detector C7027A1049 US wholesale prices