High temperature and high pressure type magnetic flap (column) level gauge Wholesale

High temperature and high pressure type magnetic flap (column) level gauge wholesale level gauge application developed from and based on the principle of buoyancy magnetic coupling. When the measured level in the container movements, leading tube level gauge float also will lift, permanent magnet inside the float is transmitted to the indicator by magnetic field coupling, drive red, white turned columns flip 180 degrees, when When the liquid level rises, the column turned from white to red when the level drops, the column turned from red to white, pointer red, white circles located at the medium level of the actual height of the container, in order to achieve the level instructions. Magnetic flap level gauge electrical remote realized by combining the basic type and level remote device. Level remote device consists of UR-type resistive sensor and UB type R / I converter module, the transmitter sensor in the form of bundled fixed on the outside of the main conduit UHZ magnetic flap level gauge, it is in the level count the same magnetic coupling system. High temperature and high pressure type magnetic flap (column) level gauge A. Basic technical parameters measuring range: 300 ~ 15000mm ?????????????????????????? ? Accuracy: ± 5.0mm, ± 10mm Working temperature: -40 ~ 250 ℃? (ABS PP-R, PVC: -40 ~ 80 ℃) ?? special type up to 450 ℃ Working pressure: ≤2.5MPa (2.5 MPa or more can be set separately juice) ???????? anticorrosive ≤0.6MPa medium viscosity: ≤1st (10-4m2 / s) ????????????????? ??????? medium density: ≥450kg / m3 medium density difference: ≥ 150kg / m3 ?????????????????????????? sewage Interface : ZG1 / 2 "(internal) environmental vibration: frequency ≤25Hz, amplitude ≤0.5mm ??????????????? following speed: ≤0.08m / s wetted material: stainless steel (1Cr18Ni9Ti , 316,316L) Teflon lined stainless steel (1Cr18Ni9Ti lining PTFE,) PVC plastic (polyvinyl chloride), PP-R, ABS connection process: Side-mounted HG20592-97 DN25 ?? PN4.0 (or user-specified) ?????????? top-mounted HG20592-97 DN100 PN1.6 (or user-specified) ?????????? jacket flange HG20592-97 DN15 ?? PN1.6 (or Users specify) B. remote output a signal: 4 ~ 20mA ?????????????????????????????? load impedance: 350Ω (24VDC When) Power supply: 18 ~ 30VDC (nominal 24VDC) ?????????????? Ambient temperature: -40 ~ 80 ℃ Relative humidity: ≤90% RH ????????? ????????????????????? ??? power consumption: 0.5W Intrinsically Safe: ibIICT4 ???????????????? ?????????????? flameproof: dIIBT4 C. control alarm switch output type: normally open and normally closed switch signal ????????????????? ???? alarm Accuracy: + 10mm Ambient Temperature: -40 ~ 80 ℃ ???????????????????????????? working life: ≥105 second outlet Interface: M20 1.5 or internal thread 3/4 "?