Supply DH-III skid detector manufacturers

[DH-III skid detector] Supply's instructions DH-III skid detector physical map DH-II DH-III price skid detector DH-III skid detector manufacturers speed detector speed detector conveyor speed detection device Conveyor skid stall detector detector detector DH-III skid effect: DH-III skid detector for detecting skid conveyor in the operation of the tape between the rollers and the initiative to prevent skidding caused by malignant thing help, also can be used for multiple tape machine interlock start and stop, low speed brake and overspeed protection. Contact: Liu Xia Tel: 15376557133 Tel: 0537-2349366 DH-Ⅲ type skid detector works: When occur between tape and drive rollers slipping, so the tape speed is reduced to the normal rate of 70% (or other preset rate), the speed switch contact is open 1,2 3,4 skid switch contact closure output signal. DH-III type: drive when the tape is running continuously rotating drive trolley, driven by rotation of the drive shaft speed relay, speed relay permanent inner core generates a magnetic torque toggle spring contact, contact with the outer contact output switching signal 1 2 contact closure, 3,4 contacts open. Speed ??continuous duty relays, the stability at 3000 r / min or less, repeatedly made short work of the (frequent starting and braking) does not exceed 30 times DH-III skid detector DH-S skid detector per minute major Technical Specifications: 1. Detection belt speed range: 0.1-9.9 m 2. Operating voltage: AC220V50Hz 3. Contact capacity: A220V10A 4. sensor and tape speed error: <0.01% 5. slippage range arbitrarily set Contact: Liu Xia Tel: 15376557133 Tel: 0537-2349366