Multifunction lightning surge test stand in line with IEC61000-4-5

SG5010H series of automatic surge test station is the third generation of intelligent multi-functional integrated test generator is based on the technical use of programmable controllers and computer technology, greatly simplifies the system components, improving the reliability of the system sex. This greatly enhances the security of the system at high voltage, high current test, the device may suffer harm avoid high-voltage discharge transients. Unique color touch screen interface with a good man-machine dialogue function, easy operation is simple, just in the parameter setting page needs a simple test setup, you can complete a variety of test procedures performed automatically, with a high degree of system integration, intelligent control technology, easy to operate, saving testing time and other advantages. Optional intelligent measurement acquisition system, the peak voltage and current LCD display. Standard IEC61000-4-5, IEC 61643-1, GB / T17626.5, GB / T16927.1, ITU K21, ITU K44 Advantages 1. 7-inch color touch screen LCD; 2. computer technology, automatic control system; 3. Intelligent high-voltage power supply charging mode; 4. A variety of automatic fault judgment, sound and light alarm 5. No contact discharge switch, reduce discharge noise 6. Optional TDS3012C oscilloscope, with measurement and analysis system automatically calculates the peak voltage waveform parameters 7. Current Online acquisition system, LCD display (optional) 8. security test box can be built, tested components products safer 9. Built-in single-phase, three-phase automatic coupling decoupling network 10.RS232 communication interface, which enables remote control parameter combination wave parameters open circuit voltage peak voltage 300V ~ 10kV (± 10%) Rise time 1.2 (± 30%) ms duration of 50 (± 20%) ms short circuit current peak current 150A ~ 5kA (± 10%) rise time 8ms (± 20%) Duration 20ms (± 20%) virtual impedance 2Ω ± 0.25Ω output polarity positive or negative / positive to negative (or the first negative and then positive) network (built) Optional single-phase, three-phase automatic coupling decoupling network voltage wave parameters output voltage 300V ~ 10kV ± 10% output impedance of 500Ω ± 10% output polarity positive or negative / positive to negative (or positive and negative alternately each time) Output voltage wave 1.2 ± 30% 50 ± 20 % μs communication wave parameters output voltage 300V ~ 10kV ± 10% output polarity positive or negative / positive to negative (or the first negative and then positive) output voltage wave 10/700 ± 20% μs output current wave 5/320 ± 20% μs output impedance of 15Ω, 40Ω (25 + 15Ω) output short circuit current 15 ~ 250A ± 10% network (built) Optional 2-way 4-wire, 4-way 8-line coupling decoupling network common parameters Power Supply AC220V ± 10%, 50 / 60Hz Ambient temperature -10- + 40 ℃ Relative humidity 35% -85% RH (non-condensing) grounding resistance of less than 0.5Ω Dimensions 600 × 800 × 1720 Weight about 200kg non-conductive dust, no fire and explosion hazards, no corrode metal and insulation of the gas, the supply voltage waveform is a sine wave, waveform distortion rate <5%