MQ1601 Used high frequency Q, Q, Q value measuring instrument UHF

Meguro MEGURO-Q Table MQ-1601 This machine is a Q value of the coil can be measured, the effective inductance, effective resistance, distributed capacitance, high frequency effective resistance of the Q value of the capacitor, the effective capacity, resistors, high frequency cable inductance, capacitance, characteristic impedance, parallel tuned circuit effective resistance, etc. Determination of very wide range Q. Using the sale of dielectric loss measurement units, can be measured medium rate ε insulator or loss angle tanδ. Specialty due to the overall residual inductance small, only 10nH the following (conventional products 1/2 ), the measurement of small coil can get very high measurement accuracy. Use a high stability of the Q voltmeter, it can properly direct reading lower Q values. As a result of the 6-digit frequency counter, you can set or read the correct frequency. ⊿Q (small changes in quantity Q) Q sub-file in accordance with the sensitivity to measure the change in the amount of 1/10. With more than a pre-set value of the Q discriminator indicator light for mass production line of the Q value of the sorting section is extremely convenient. With CORRELATE adjuster can be compared with other appearances Q Q-related compensation (in CALD. Position indication formal Q value). Because with display header binning range indicator, without misuse. Specifications measurement frequency measurement frequency range: 15.5KHz ~ 50MHz 7 Frequency (measured 15.75KHz) A, 15.5 ~ 50KHz B, 50 ~ 160KHz C, 160 ~ 500KHz D, 500 ~ 1600KHz E, 1.6 ~ 5MHz F, 5 ~ 16MHz G, 16 ~ 50MHz frequency counter: 15.5 ~ 160KHz (A, B band) Resolution: 1Hz 160 ~ 1600KHz (C, D band) Resolution: 10Hz 1.6 ~ 50MHz (E ~ G band) Resolution: 100Hz reference frequency accuracy Accuracy: ± less than 3 × 10-5 Q (measurement range and the Q value scale, ⊿Q measurement range) Q value of the sub-block Q measurement range ⊿Q smallest scale measurement range of the effective range of the effective range of the minimum scale of 0 to 255 ~ 25 0.5 0 ~ 40 10 ~ 4010 ~ 7515 ~ 750 ~ 7.5 ~ 0.1 0 ~ 12 025 ~ 12 050 ~ 25 050 0.5 0 12 ~ 2500 ~ 250 ~ 400 100 ~ 400 100 ~ 40 1.0 ~ 0 750 150 ~ 750 0 ~ 75 Q measurement accuracy: ± 10% or less of the maximum value representing (20MHz or less), with ± 20% or less (20MHz above) Q LIMIT value judgment: Q value exceeds the pre-set time, the light spot bright. Tuning capacitance characteristics: 19 ~ 480pF main tuning capacitor: 22 ~ 480pF 22 ~ 100pF (minimum scale 1pF) 100 ~ 480pF (minimum scale 5pF) Accuracy: auxiliary tuning capacitor: -3 ~ + 3pF Accuracy: Within ± 0.1pF scale : Minimum scale 0.1pF residual inductance: Measuring range of about 0.009 μH inductance: 0.1μH ~ 1H, 7-speed (direct reading on the specified frequency) Accuracy: within ± 5% (0.5μH above) ± 10% or less (0.5μH less , less the residual inductance) measurement voltage (measured on the analyte applied voltage): Q × 0.01Vrms = 25,75,250,750 file Q × 0.00625Vrms = 40,120,400 gear Q value indicates the adjustment range (CORRELATE): approximately ± less than 10% of the power supply: AC100V, 115V, 215V, 230V ± 10% 50 / 60Hz about 20VA Dimensions: approximately 430W × 220H × 300D (mm) Weight: about 10Kg